A beverage center is a specialty appliance designed to store and chill beverages like soda, beer, and wine at optimal temperatures. Unlike regular fridges, beverage centers offer precise temperature control, adjustable shelves for different bottle sizes, and stylish features.

Beverage centers can store a variety of drinks including sodas, beers, bottled water, juices, and wines. Select models may have dual-zone temperature controls, allowing for different types of beverages to be stored at their ideal temperatures.

Key features include temperature control, capacity, adjustable shelving, dual-zone cooling, energy efficiency, reduced noise level, door lock, lighting, and stylish aesthetics.

Danby wine cellars and beverage centers are not designed for outside installation. This includes any location that is not temperature controlled. Placing your wine cellar/beverage center in an unsuitable location will void the warranty.

Yes. Many of our beverage centers are designed to be built into cabinetry for a seamless look. Freestanding units are also available. Refer to your owner’s manual for specifications to ensure proper ventilation and installation requirements are met for built-in models.

Typically, a clearance of 2-3 inches around the sides and back is recommended for proper ventilation. Built-in models have front-venting systems which require less clearance. Refer to your owner’s manual for specific clearance requirements.

Ensure the unit is plugged in and the thermostat is set correctly. Check for blocked vents or dirty condenser coils. Make sure the door is fully closed and the seals are intact. If the issue persists, visit danby.com/support for further assistance.

Ensure the unit is on a stable and level surface, and check for loose items or parts. If the noise continues, it may require professional service.

Check if the door is properly closed and the seals are intact. Ensure the unit is level. Inspect the drip tray and water lines for blockages or damage. If the issue persists, visit danby.com/support for further assistance.

The fan will cycle every 8 to 12 seconds as part of its normal operation.

If too many bottles/cans are put in at once, or the door has not been closed tightly, the unit will display the HI/LO signal. This is normal. Wait 5 minutes after closing the door and HI/LO will disappear. If the issue persists, restart the unit by unplugging it. If the problem occurs after restart, visit danby.com/support for further assistance.

We recommend cleaning the interior and exterior of the beverage center every few months. Use a mild detergent and water for cleaning, and avoid abrasive materials that can damage surfaces.

Regular maintenance includes; cleaning condenser coils, checking door seals, ensuring proper ventilation, and inspecting/ cleaning the drip tray and water lines to prevent blockages and leaks.

Beverage Centers typically last 8 to 12 years, or longer, with proper maintenance. The lifespan can vary based on usage, maintenance, and model. Regular servicing can help to extend the life of these components.

No Faq's Found