Danby Designer 14000 BTU Portable Air Conditioner
DPA140HCB1WDD
Danby Designer 14000 BTU Portable Air Conditioner
DPA140HCB1WDDLimited Quantity
Description
Available.
Specifications
| Dimensions | ||
| Product Width | 46.67 cm | 18 3/8" |
|---|---|---|
| Product Depth | 39.69 cm | 15 5/8" |
| Product Height | 76.52 cm | 30 1/8" |
| Weight | ||
| Shipping Weight | 41.00kg | 90.39lb |
|---|---|---|
| Capacity | ||
| Loading Capacity |
|
|
|---|---|---|
| Package Dimensions | ||
| Package Width | N/A | |
|---|---|---|
| Package Depth | N/A | |
| Package Height | N/A | |
Downloads
Warranty
18 month parts and labor coverage with in-home service. Installation and/or yearly maintenance (cleaning) are not covered under warranty.
FAQs
Units with three drainage ports are units which also feature heat mode. The bottom drainage port empties the internal pan, the middle port is for continuous drain during heat and the top port is for continuous drain during dry mode. Please consult your owner’s manual for more detail.
On most models with heat mode, it is advised to use the hose for direct drain. This will ensure the pan does not fill up too quickly.
You should always use it during cooling and heating. It is not required during fan and dry mode. Please consult your owner’s manuals for more details.
During heat mode, dry mode or continuous draining. Please consult your owner’s manuals for more details.
The water drains from the drainage port. If you are not using the continuous drain, the internal pan drains from the bottom outlet. Consult your owner’s manual for more information.
Dual hose models have an intake and exhaust hose. With single hose models, the hose exhausts and the air that is to be “conditioned” is taken in from the room through the unit.
Information pertaining to watts and amps can be found on the rating plate located on the back of the unit.
When selected, this automatically sets the appropriate option for your room based on the ambient temperature. For example, if it is 15°C outside, the unit would flip to fan mode. If it is set to 30°C, the unit would revert back to cooling mode.