Danby 6 Place Setting Dishwasher

SKU: DDW611WLED Category:
This product has been discontinued.
  • 6 place setting counter-top dishwasher
  • Low water consumption – 3.17 gallons (12 litres) during normal cycle
  • Quick connect to any tap
  • 6 wash cycles: normal, heavy, light, speed, soak, glass
  • Durable stainless steel interior
  • Convenient automatic detergent and rinse agent dispenser
  • Electronic controls with LED display
  • Fits under most cabinets


It’s never been easier to washing as it is with this stylish countertop dishwasher. This unit  utilizes just 3.17 gallons (12 litres) of water for a normal cycle. It comes with six different settings which can easily be programmed and monitored via the electronic LED display. The wash cycles are soak, glass, speed, heavy, light, and normal. The dishwasher is designed for simple and quick installation as it can easily be hooked up to any tap in your . Keeping the appliance clean is a breeze due to its durable stainless-steel interior. There is an auto detergent and rinse agent dispenser for your convenience and this chic dishwashing unit is designed to fit under just about any type of cabinet. It also comes with a 12-month warranty on parts and labor.

Product Dimensions
  • Product Width
    21 10/16"
    53.34 cm
  • Product Depth
    19 11/16"
    48.26 cm
  • Product Height
    17 4/16"
    43.18 cm
    Package Dimensions
    • Package Width
      60.96 cm
    • Package Depth
      55.88 cm
    • Package Height
      53.34 cm
    • Product Weight
      49.6 lbs
      22.50 kg
    • Package Weight
      58 lbs
      26.31 kg

    12 months parts and labor coverage. Installation and/or yearly maintenance (cleaning) are not covered under warranty.

    Information pertaining to watts and camps can be found on the rating plated located on the side of the unit.
    We do not recommend using an extension cord.
    Check to make sure that the filters and drainage area are not clogged.
    Try setting the unit to a high temperature. The unit can take up to 2 hours to heat up the cold water depending on the temperature setting.
    Our units are designed to fit standard North American faucets.
    Please refer to your owner's manual for specifications on how much room is needed between the unit and each adjacent wall.
    Salt is not needed, however it is recommended. Note that if you do not use salt, the unit will still function, however the indicator light will remain illuminated.
    Rinse aid is not needed, however it is recommended. Note that if you do not use rinse aid, although the unit will still function, the rinse aid indicator light will remain illuminated.
    There is a protective layer of plastic that protects your control panel during transportation. This should be removed during installation.