Premiere 70

SKU: DDR70A2GP Category:
This product has been discontinued.

Compare
Description

Excessive humidity and moisture can easily be removed from your room or office with this modern and efficient 70-pint (33.1 litre) portable dehumidifier. It’s designed to remove up to 70 pints of moisture every 24 hours from large areas up to 3,800 square feet. This will lower the temperature naturally, meaning you won’t need to run the air conditioning all the time. This will result in lower electricity bills and since the unit is Energy Star compliant you’ll save even more money. It’s convenient to move from room to room due to the built-in rolling castors meaning you can create a comfortable environment in numerous areas of your home. The electronic controls are easy to read and program and the appliance can run in temperatures as low as 5ºC (41F). A drain hose is included for direct draining and the environmentally-friendly model uses R410A refrigerant. There is a low and high fan speed, an automatic restart feature and an auto de-icing system. When it comes time to clean the filter it can easily be removed, washed, and put back in.

Specifications
Product Dimensions
  • Product Width
    15 1/4"
    38.10 cm
  • Product Depth
    12 3/16"
    30.48 cm
  • Product Height
    23 9/16"
    58.42 cm
    Package Dimensions
    • Package Width
      17"
      43.18 cm
    • Package Depth
      14"
      35.56 cm
    • Package Height
      26"
      66.04 cm
    Weight
    • Product Weight
      41.5 lbs
      18.82 kg
    • Package Weight
      47.8 lbs
      21.68 kg
    Warranty

    24 months parts and labor coverage with carry-in service. Installation and/or yearly maintenance (cleaning) are not covered under warranty.

    FAQs
    Information pertaining to watts and camps can be found on the rating plated located on the side of the unit.
    We do not recommend using an extension cord.
    Square feet is calculated by multiplying the length by the width.  For example, a room that is 10 feet long by 25 feet wide is 250 square feet.
    This varies based on model, however most models have been manufactured to have the fan turn off automatically.
    This is not recommended, as the unit is built to operate using the drain hose/power cord provided.
    This varies by model, however all dehumidifiers are a one shot timer. Please refer to the owner's manual for timer instruction.
    This feature varies according to the product you have. It is recommended to check the manual for detailed instructions. Some models require screwing the hose onto the outlet on the back of the unit. Other models require the hose to be fed through the back of the unit and connect to the adaptor above the bucket area, then replace the bucket.
    There are a couple of reasons this could be occuring. 1) There may not be enough humidity in your environment or 2) Your relative humidity set higher than ambient humidity. Please adjust your settings accordingly if this is the case.
    This will vary based on humidity level. It will pump out the water when it reaches a certain level (pump models only).
    It is supposed to be there to help determine the water level.
    We recommend setting your dehumidifier to between 40-50%.
    Danby dehumidifiers uses 2.2 to 4.1 Amps, and 250 to 420 Watts, based on this year’s model, varying with size.
    Danby’s dehumidifiers operate at a sound level between 50 and 56 decibels. This is within the normal decibel range for modern “quiet” dehumidifiers.
    Danby dehumidifiers come with reusable filters.  You would only need to replace a filter if it becomes damaged.
    All Danby dehumidifiers offer both a bucket for collecting water which can be removed and emptied when full as well as a continuous drain which bypasses the bucket with the use of a hose and gravity to empty into a drain.  Some models have a pump option.
    The water produced by your Danby’s dehumidifiers is referred to as grey water. It is not suitable for drinking, but can be great for watering plants and flowers.