Designed for delightful owner support
Danby 30 PintDDR030EAWDB This product is no longer available.
Get rid of unwanted moisture from your home with this 30-pint dehumidifier by Danby. This dehumidifier removes up to 30 pints (14.2 litres) of moisture in a 24 hour period and is ideal for spaces up to 1,500 square feet. The automatic shutoff feature prevents the bucket from overflowing and with the direct drain feature you have the option of continuous operation. Energy Star rated, this unit also comes with a 24-hour timer that allows you to run your Danby dehumidifier during off-peak hours to help save on your monthly hydro bill. If you're planning to use this unit somewhere cold like a basement, the automatic de-icer feature allows the unit to run in temperatures as low as 41ºF (5ºC).
|Product Width||33.50 cm||13 3/16"|
|Product Depth||24.92 cm||9 13/16"|
|Product Height||52.07 cm||20 8/16"|
|Package Width||53.49 cm||21.06"|
|Package Depth||29.01 cm||11.42"|
|Package Height||37.31 cm||14.69"|
- Controls humidity in spaces up to 1,500 sq. ft.
- Energy Star® compliant
- Environmentally friendly R410A refrigerant
- Electronic controls with LED display
- Powerful 2 speed fan
- Low temperature feature allows the system to continue to operate at temperatures as low as 5ºC (41ºF)
- Auto Restart: unit automatically restarts after a power failure
- Auto de-icer prevents frost build up
- Direct drain feature allows for continuous operation
- Reusable, washable air filter
- 4 castors for easy room to room transport
24 months parts and labour coverage with carry-in service. Installation and/or yearly maintenance (cleaning) are not covered under warranty.
This feature varies according to the product you have. It is recommended to check the manual for detailed instructions. Some models require screwing the hose onto the outlet on the back of the unit. Other models require the hose to be fed through the back of the unit and connect to the adaptor above the bucket area, then replace the bucket.
The water produced by your Danby’s dehumidifiers is referred to as grey water. It is not suitable for drinking, but can be great for watering plants and flowers.
All Danby dehumidifiers offer both a bucket for collecting water which can be removed and emptied when full as well as a continuous drain which bypasses the bucket with the use of a hose and gravity to empty into a drain. Some models have a pump option.
Danby dehumidifiers come with reusable filters. You would only need to replace a filter if it becomes damaged.
Danby’s dehumidifiers operate at a sound level between 50 and 56 decibels. This is within the normal decibel range for modern “quiet” dehumidifiers.
Danby dehumidifiers uses 2.2 to 4.1 Amps, and 250 to 420 Watts, based on this year’s model, varying with size.
There are a couple of reasons this could be occurring. 1) There may not be enough humidity in your environment or 2) Your relative humidity set higher than ambient humidity. Please adjust your settings accordingly if this is the case.
It is supposed to be there to help determine the water level.
We recommend setting your dehumidifier to between 40-50%.
Yes, usually this air feels warm.
This varies based on model, however most models have been manufactured to have the fan turn off automatically.
This will vary based on humidity level. It will pump out the water when it reaches a certain level (pump models only).
This varies by model, however all dehumidifiers are a one shot timer. Please refer to the owner’s manual for timer instruction.