ArcticAire 70 Pint DehumidifierADR70B1G
This sharp 70-pint (33.1 litre) dehumidifier is second to none when it comes to removing harmful and uncomfortable dampness from your living space, basement or office. This formidable unit can quietly and quickly eliminate moisture from areas up to approximately 4,500 square feet in size. This Energy Star-compliant model is just what the doctor ordered for those hoping to cut down on electricity bills and the R410A environmentally-friendly refrigerant is designed not to harm the ozone layer. The modern electronic controls with LED display allow for trouble-free programming of the adjustable humidity settings and two-speed fan. The component will operate continuously because of the practical direct-drain system and the low-temperature mechanism will make sure the room doesn’t get any cooler than 5°C (41°F). The quiet operation won’t upset your sleeping habits and the automatic-de-icer means the coils won’t suffer from ice buildup. When it comes time to clean the unit it’s can be done in a flash due to the removable filter. In addition, the easy-rolling, built-in castors enable you to move the dehumidifier from location to location quite effortlessly. This stylish appliance offers peace of mind with a 24-month warranty on parts and labour with carry-in service.
|Product Width||39.05 cm||15 3/8"|
|Product Depth||27.94 cm||11"|
|Product Height||59.06 cm||23 1/4"|
There are a couple of reasons this could be occurring. 1) There may not be enough humidity in your environment or 2) Your relative humidity set higher than ambient humidity. Please adjust your settings accordingly if this is the case.
It is supposed to be there to help determine the water level.
Information pertaining to watts and amps can be found on the rating plate located on the back of the unit.
We recommend setting your dehumidifier to between 40-50%.
Yes, usually this air feels warm.
This varies based on model, however most models have been manufactured to have the fan turn off automatically.
This varies based on model. With some models you simply screw the hose onto the outlet on the back of the unit. With other models you have to remove the bucket, feed the hose through the back of the unit and connect to the adaptor above the bucket area, then replace the bucket. It is important to look at your control panel. Some units have a “continuous drain” button on the control panel. If that is the case for your unit, you must press this button after the hose is in place or the function will not work. Please refer to your owner’s manual.
This will vary based on humidity level. It will pump out the water when it reaches a certain level (pump models only).
This varies by model, however all dehumidifiers are a one shot timer. Please refer to the owner’s manual for timer instruction.