Designed for delightful owner support
Danby 30 Pint DehumidifierDDR30B2GDB
Your family’s health and comfort can be improved greatly with this stylish 30-pint (14.2 litre) dehumidifier. The portable Energy Star-compliant unit is designed to operate effectively and quietly in rooms of up to approximately 1,500 square feet in size. The modern electronic controls with LED display make it easy to program the adjustable humidity settings and two-speed fan. The appliance’s smart low-temperature mode enables it to operate until the temperature reaches 5°C (41°F). The direct-drain system is ideal for continuous use while cleaning is as easy as can be due to the removable filter. This popular model also comes with an automatic restart function and the built-in castors make it quite easy to transport from room to room. It also runs on environmentally-friendly R410A refrigerant to help save the ozone layer and the automatic de-icing system guarantees the coils stay free of ice. This sleek dehumidifier is even more attractive with its satisfying 12-month warranty on parts and labour with carry-in service.
|Product Width||36.04 cm||14 3/16"|
|Product Depth||26.04 cm||10 1/4"|
|Product Height||51.22 cm||20.16666667"|
This feature varies according to the product you have. It is recommended to check the manual for detailed instructions. Some models require screwing the hose onto the outlet on the back of the unit. Other models require the hose to be fed through the back of the unit and connect to the adaptor above the bucket area, then replace the bucket.
The water produced by your Danby’s dehumidifiers is referred to as grey water. It is not suitable for drinking, but can be great for watering plants and flowers.
All Danby dehumidifiers offer both a bucket for collecting water which can be removed and emptied when full as well as a continuous drain which bypasses the bucket with the use of a hose and gravity to empty into a drain. Some models have a pump option.
Danby dehumidifiers come with reusable filters. You would only need to replace a filter if it becomes damaged.
Danby’s dehumidifiers operate at a sound level between 50 and 56 decibels. This is within the normal decibel range for modern “quiet” dehumidifiers.
Danby dehumidifiers uses 2.2 to 4.1 Amps, and 250 to 420 Watts, based on this year’s model, varying with size.
There are a couple of reasons this could be occurring. 1) There may not be enough humidity in your environment or 2) Your relative humidity set higher than ambient humidity. Please adjust your settings accordingly if this is the case.
It is supposed to be there to help determine the water level.
We recommend setting your dehumidifier to between 40-50%.
Yes, usually this air feels warm.
This varies based on model, however most models have been manufactured to have the fan turn off automatically.
This will vary based on humidity level. It will pump out the water when it reaches a certain level (pump models only).
This varies by model, however all dehumidifiers are a one shot timer. Please refer to the owner’s manual for timer instruction.