Danby 30 BTU DehumidifierDDR30B2GDB
Your family’s health and comfort can be improved greatly with this stylish 30-pint (14.2 litre) dehumidifier. The portable Energy Star-compliant unit is designed to operate effectively and quietly in rooms of up to approximately 1,500 square feet in size. The modern electronic controls with LED display make it easy to program the adjustable humidity settings and two-speed fan. The appliance’s smart low-temperature mode enables it to operate until the temperature reaches 5°C (41°F). The direct-drain system is ideal for continuous use while cleaning is as easy as can be due to the removable filter. This popular model also comes with an automatic restart function and the built-in castors make it quite easy to transport from room to room. It also runs on environmentally-friendly R410A refrigerant to help save the ozone layer and the automatic de-icing system guarantees the coils stay free of ice. This sleek dehumidifier is even more attractive with its satisfying 12-month warranty on parts and labour with carry-in service.
|Product Width||36.04 cm||14 3/16"|
|Product Depth||26.04 cm||10 1/4"|
|Product Height||51.22 cm||20.16666667"|
- 30 pint (14.2 litre) capacity dehumidifier per 24 hours
- For areas up to 1,500 sq. ft. depending on conditions
- Energy Star® compliant
- Environmentally friendly R410a refrigerant
- Electronic controls with LED display
- Quiet operation
- Adjustable humidity settings
- Auto de-icer prevents ice build-up on coils
- Removable air filter is easy to clean
- 2 fan speeds
- Low temperature feature allows the system to continue to operate until temperature reaches 5ºC (41ºF)
It is supposed to be there to help determine the water level.
We recommend setting your dehumidifier to between 40-50%.
This will vary based on humidity level. It will pump out the water when it reaches a certain level (pump models only).
There are a couple of reasons this could be occuring. 1) There may not be enough humidity in your environment or 2) Your relative humidity set higher than ambient humidity. Please adjust your settings accordingly if this is the case.
Yes, usually this air feels warm.
Information pertaining to watts and amps can be found on the rating plate located on the back of the unit.
This varies based on model. With some models you simply screw the hose onto the outlet on the back of the unit. With other models you have to remove the bucket, feed the hose through the back of the unit and connect to the adaptor above the bucket area, then replace the bucket. It is important to look at your control panel. Some units have a “continuous drain” button on the control panel. If that is the case for your unit, you must press this button after the hose is in place or the function will not work. Please refer to your owner’s manual.
This varies by model, however all dehumidifiers are a one shot timer. Please refer to the owner’s manual for timer instruction.
This is not recommended, as the unit is built to operate using the drain hose/power cord provided.
This varies based on model, however most models have been manufactured to have the fan turn off automatically.