Designed for delightful owner support
ArcticAire 70 PintADR70B6G This product is no longer available.
This sharp 70-pint (33.1 liter) dehumidifier is second to none when it comes to removing harmful and uncomfortable dampness from your living space, basement or office. This formidable unit can quietly and quickly eliminate moisture from areas up to approximately 4,500 square feet in size. This Energy Star-compliant model is just what the doctor ordered for those hoping to cut down on electricity bills and the R410A environmentally-friendly refrigerant is designed not to harm the ozone layer. The modern electronic controls with LED display allow for trouble-free programming of the adjustable humidity settings and two-speed fan. The component will operate continuously because of the practical direct-drain system and the low-temperature mechanism will make sure the room doesn’t get any cooler than 41ºF (5ºC). The quiet operation won’t upset your sleeping habits and the automatic-de-icer means the coils won’t suffer from ice buildup. When it comes time to clean the unit it’s can be done in a flash due to the removable filter. In addition, the easy-rolling, built-in castors enable you to move the dehumidifier from location to location quite effortlessly. This stylish appliance offers peace of mind with a 24-month warranty on parts and labor with carry-in service.
|Product Width||39.05 cm||15 6/16"|
|Product Depth||27.94 cm||11"|
|Product Height||59.06 cm||23 4/16"|
- 70 U.S. pint (33.1 liter) capacity per 24 hours
- For areas up to 4,500 sq. ft. depending on conditions
- Energy Star® compliant
- Environmentally friendly R410A refrigerant
- Electronic controls
- 2 Fan speeds (High/Low)
- Low temperature feature allows the system to continue to operate until temperature reaches 41ºF (5ºC)
- Auto Restart feature
- Auto de-icer prevents ice build-up on coils
- Direct drain feature for continuous operation
- Removable air filter is easy to clean
- Castors for easy portability
24 month parts and labour coverage with carry-in service. Installation and/or yearly maintenance (cleaning) are not covered under warranty.
This feature varies according to the product you have. It is recommended to check the manual for detailed instructions. Some models require screwing the hose onto the outlet on the back of the unit. Other models require the hose to be fed through the back of the unit and connect to the adaptor above the bucket area, then replace the bucket.
The water produced by your Danby’s dehumidifiers is referred to as grey water. It is not suitable for drinking, but can be great for watering plants and flowers.
All Danby dehumidifiers offer both a bucket for collecting water which can be removed and emptied when full as well as a continuous drain which bypasses the bucket with the use of a hose and gravity to empty into a drain. Some models have a pump option.
Danby dehumidifiers come with reusable filters. You would only need to replace a filter if it becomes damaged.
Danby’s dehumidifiers operate at a sound level between 50 and 56 decibels. This is within the normal decibel range for modern “quiet” dehumidifiers.
Danby dehumidifiers uses 2.2 to 4.1 Amps, and 250 to 420 Watts, based on this year’s model, varying with size.
There are a couple of reasons this could be occurring. 1) There may not be enough humidity in your environment or 2) Your relative humidity set higher than ambient humidity. Please adjust your settings accordingly if this is the case.
It is supposed to be there to help determine the water level.
We recommend setting your dehumidifier to between 40-50%.
Yes, usually this air feels warm.
This varies based on model, however most models have been manufactured to have the fan turn off automatically.
This will vary based on humidity level. It will pump out the water when it reaches a certain level (pump models only).
This varies by model, however all dehumidifiers are a one shot timer. Please refer to the owner’s manual for timer instruction.