Skip to content

ArcticAire 30 Pint

ADR30B6G
  • Energy Star
  • ArcticAire 30 Pint - ADR30B6G
ArcticAire

ArcticAire 30 Pint

ADR30B6G

Discontinued

  • Energy Star
Do the Right Thing.

Description

You’ll never have to worry about damp, stale air again with this elite 30-pint (14.2 liter) capacity dehumidifier from Danby. This portable Energy Star-compliant unit will minimize electricity costs and is ideal for areas up to 1,500 square feet in size. It runs on R410A refrigerant, making it very environmentally friendly and the quiet two-speed fan is perfect for circulating the air. The attractive model comes with easy-to-use electronic controls with a LED display feature as well as an automatic-restart component. The unit’s low-temperature element and direct-drain features enable it to operate continuously until the temperature reaches 41ºF (5ºC). While the smart automatic de-icing system makes sure that the coils stay ice free. The adjustable humidity settings can be programmed quite effortlessly and the air filter is removable making it as easy as pie to clean. This solid dehumidifier can easily be moved from room to room due to the built-in castors and it comes with a 24-month warranty on parts and labor with carry-in service.

Specifications

Dimensions
Product Width 36.04 cm 14 3/16"
Product Depth 26.04 cm 10 4/16"
Product Height 50.96 cm 20 1/16"
Weight
Shipping Weight 14.30kg 31.53lb
Power Specifications
Wattage Watts
Amperage N/A

Features

  • 30 U.S. pint (14.2 liter) capacity per 24 hours
  • For areas up to 1,500 sq. ft. depending on conditions
  • Energy Star® compliant
  • Environmentally friendly R410A refrigerant
  • Electronic controls
  • 2 Fan speeds (High/Low)
  • Low temperature feature allows the system to continue to operate until temperature reaches 41ºF (5ºC)
  • Auto Restart: unit automatically restarts after a power failure
  • Auto de-icer prevents ice build-up
  • Direct drain feature for continuous operation
  • Reusable, washable air filter
  • 4 castors for easy room to room transport

Warranty

24 month parts and labour coverage with carry-in service. Installation and/or yearly maintenance (cleaning) are not covered under warranty.

FAQs

This feature varies according to the product you have. It is recommended to check the manual for detailed instructions. Some models require screwing the hose onto the outlet on the back of the unit. Other models require the hose to be fed through the back of the unit and connect to the adaptor above the bucket area, then replace the bucket.  
The water produced by your Danby’s dehumidifiers is referred to as grey water. It is not suitable for drinking, but can be great for watering plants and flowers.
All Danby dehumidifiers offer both a bucket for collecting water which can be removed and emptied when full as well as a continuous drain which bypasses the bucket with the use of a hose and gravity to empty into a drain.  Some models have a pump option.
Danby dehumidifiers come with reusable filters.  You would only need to replace a filter if it becomes damaged.
Danby’s dehumidifiers operate at a sound level between 50 and 56 decibels. This is within the normal decibel range for modern “quiet” dehumidifiers.
Danby dehumidifiers uses 2.2 to 4.1 Amps, and 250 to 420 Watts, based on this year’s model, varying with size.
There are a couple of reasons this could be occurring. 1) There may not be enough humidity in your environment or 2) Your relative humidity set higher than ambient humidity. Please adjust your settings accordingly if this is the case.
It is supposed to be there to help determine the water level.
We recommend setting your dehumidifier to between 40-50%.
This varies based on model, however most models have been manufactured to have the fan turn off automatically.
This will vary based on humidity level. It will pump out the water when it reaches a certain level (pump models only).
This varies by model, however all dehumidifiers are a one shot timer. Please refer to the owner’s manual for timer instruction.
Follow Us on