ArcticAire 30 Pint Dehumidifier

SKU: ADR30B6G Category:
This product has been discontinued.
  • 30 pint (14.2 litre) capacity dehumidifier per 24 hours
  • For areas up to 1500 sq. ft. depending on conditions
  • Energy Star® compliant
  • Environmentally friendly R410A refrigerant
  • Electronic controls with LED display
  • Adjustable humidity settings
  • Auto de-icer prevents ice build-up on coils
  • 2 fan speeds
  • Auto Restart feature
  • Direct drain system allows for continuous operation

Compare
Description

you’ll never have to worry about damp, stale air again with this elite 30-pint (14.2 liter) capacity dehumidifier from Danby. This portable Energy Star-compliant unit will minimize electricity costs and is ideal for areas up to 1,500 square feet in size. It runs on R410A refrigerant, making it very environmentally friendly and the quiet two-speed fan is perfect for circulating the air. The attractive model comes with easy-to-use electronic controls with a LED display feature as well as an automatic-restart component. The unit’s low-temperature element and direct-drain features enable it to operate continuously until the temperature reaches 41ºF (5ºC). While the smart automatic de-icing system makes sure that the coils stay ice free. The adjustable humidity settings can be programmed quite effortlessly and the air filter is removable making it as easy as pie to clean. This solid dehumidifier can easily be moved from room to room due to the built-in castors and it comes with a 24-month warranty on parts and labor with carry-in service.

Specifications
Product Dimensions
  • Product Width
    14 3/16"
    35.56 cm
  • Product Depth
    10 4/16"
    25.40 cm
  • Product Height
    20 1/16"
    50.80 cm
    Package Dimensions
    • Package Width
      16"
      40.64 cm
    • Package Depth
      12"
      30.48 cm
    • Package Height
      21"
      53.34 cm
    Weight
    • Product Weight
      29.1 lbs
      13.20 kg
    • Package Weight
      31.5 lbs
      14.29 kg
    Downloads
      Warranty

      24 months parts and labor coverage with carry-in service. Installation and/or yearly maintenance (cleaning) are not covered under warranty.

      FAQs
      Information pertaining to watts and camps can be found on the rating plated located on the side of the unit.
      We do not recommend using an extension cord.
      Square feet is calculated by multiplying the length by the width.  For example, a room that is 10 feet long by 25 feet wide is 250 square feet.
      This varies based on model, however most models have been manufactured to have the fan turn off automatically.
      This is not recommended, as the unit is built to operate using the drain hose/power cord provided.
      This varies by model, however all dehumidifiers are a one shot timer. Please refer to the owner's manual for timer instruction.
      This feature varies according to the product you have. It is recommended to check the manual for detailed instructions. Some models require screwing the hose onto the outlet on the back of the unit. Other models require the hose to be fed through the back of the unit and connect to the adaptor above the bucket area, then replace the bucket.
      Yes, usually this air feels warm.
      There are a couple of reasons this could be occuring. 1) There may not be enough humidity in your environment or 2) Your relative humidity set higher than ambient humidity. Please adjust your settings accordingly if this is the case.
      This will vary based on humidity level. It will pump out the water when it reaches a certain level (pump models only).
      It is supposed to be there to help determine the water level.
      We recommend setting your dehumidifier to between 40-50%.
      Danby dehumidifiers uses 2.2 to 4.1 Amps, and 250 to 420 Watts, based on this year’s model, varying with size.
      Danby’s dehumidifiers operate at a sound level between 50 and 56 decibels. This is within the normal decibel range for modern “quiet” dehumidifiers.
      Danby dehumidifiers come with reusable filters.  You would only need to replace a filter if it becomes damaged.
      All Danby dehumidifiers offer both a bucket for collecting water which can be removed and emptied when full as well as a continuous drain which bypasses the bucket with the use of a hose and gravity to empty into a drain.  Some models have a pump option.
      The water produced by your Danby’s dehumidifiers is referred to as grey water. It is not suitable for drinking, but can be great for watering plants and flowers.