Danby Designer 4.4 cu. ft. Compact RefrigeratorDCR044A2BSLDD
Danby’s large capacity, counter-high fridge offers plenty of additional refrigeration in a compact space. Suitable for rec-rooms, dens and workshops this 4.4 cu. ft. model includes our patented Canstor® beverage dispenser, full width freezer section and tall bottle storage.
|Product Width||52.55 cm||20.6875"|
|Product Depth||53.02 cm||20 7/8"|
|Product Height||83.03 cm||32.6875"|
Our refrigerators are not designed for outside installation. This also includes anywhere that is not temperature controlled. ie. garages, porches, carports, etc.
The temperature range varies based on model. Please consult your owner’s manual or the product page on the website.
Please refer to your product on www.danby.com.
Information pertaining to watts and amps can be found on the rating plate located on the back of the unit.
It is common for new units to have a slight plastic smell. Ensure you have removed all packing material from the fridge. If that does not help, clean the inside of the unit by following the cleaning instructions included in the owner’s manual. Once completed, place an open box of baking soda in the fridge to absorb any remaining odours.
This is normal. If you feel like it is coming on too often, adjust your temperature setting.
Have you recently opened and then closed the fridge (over the last 1-5 minutes)? If so, being unable to open the fridge again right away is an indication that your door seal is working well. An example of this is you open the fridge, grab a yogurt then close it, but then you decide you want a pudding so you try to open it again but the door seems stuck. When you opened the unit the first time for the yogurt, heat and humidity entered the fridge. When you closed the fridge, this heat was sealed into the unit. If you go to open the fridge again within 5 minutes for the pudding, it might be difficult to open the seal. Wait 5-10 minutes (this allows the hot air in the fridge to cool), when you try opening it again there should be no problem.
This varies based on model. Please refer to your owner’s manual. If your knob is a dial that has a blue strip, the darker blue/thicker side indicates the coldest setting. If it is numbered, the highest number is the coldest setting. If your model has a thermostat with temperatures in °C /F, set it to the coolest temperature.
Yes, please allow it to sit upright for 6 hours before plugging it in.