Danby 5.4 cu. ft. Dual-Tap Kegerator

SKU: DKC054A1BSL2DB Category:
  • Dual tap keg cooler
  • 5.4 cu. ft. (153L) capacity
  • Spotless steel finish – looks identical to real stainless steel but without the smudging
  • Environmentally friendly R600A refrigerant
  • Chrome guard rail and drip tray
  • The keg cooler includes a single gauge regulator, CO2 tank, and all required hardware
  • Scratch-resistant worktop
  • Freestanding, indoor application
  • Automatic defrost for hassle-free maintenance
  • Mechanical temperature control
  • Reversible door hinge for left or right-hand opening
  • Optional swivel casters for easy portability
  • Includes shelves to use as a mini-fridge
  • 12-month warranty on parts and labor with in-home service

USD $1,079.99


You will be the best party host with this ultimate indoor freestanding kegerator by Danby Appliances, whether you are a beer drinker or an avid entertainer. This dual tap keg cooler can be used as a mini-fridge and is an exceptional addition to any wet bar, game room, or man cave, and provides the convenience of two different cold beers on tap at once. It uses an environmentally-friendly R600A refrigerant and has an automatic-defrosting system, making for an excellent product with hassle-free maintenance. This keg cooler includes a single gauge regulator, CO2 tank, and all required hardware. It has a precise mechanical thermostat to keep your beer cold and a spotless-steel finish resembling stainless-steel but much easier to clean. Did we mention it has a scratch-resistant worktop? In addition, this unit includes an American Sankey coupler, a chrome guard rail, a drip tray, and optional swivel casters for easy portability. The door hinge is reversible, allowing you to adjust it for left or right-handed opening based on preference.

Product Dimensions
  • Product Width
    52.32 cm
  • Product Depth
    61.72 cm
  • Product Height
    84.07 cm
Package Dimensions
  • Package Width
    57.40 cm
  • Package Depth
    69.60 cm
  • Package Height
    89.00 cm
  • Product Weight
    94.8 lbs
    43.00 kg
  • Package Weight
    102.5 lbs
    46.49 kg

12 months parts and labor coverage with in-home service. Installation and/or yearly maintenance (cleaning) are not covered under warranty.

Information pertaining to watts and camps can be found on the rating plated located on the side of the unit.
Danby’s refrigerators are meant to be free-standing units. However, units can be built in as long as the space/ventilation requirements indicated in the owner’s manual are met. Do not fully enclose the appliance in a cabinet. The front of the appliance should be left open so that air can circulate around the appliance.
Yes, please allow it to sit upright for 6 hours before plugging it in.
This could be happening for a couple of reasons: 1) the keg is unsettled 2) the beer is too warm 3) The pressure is not set properly (we recommend 8-10 pounds) 4) there could be a kink in the line.