Danby 70 DehumidifierDDR70A3GDB This product is no longer available.
This appealing model fights off the stale, damp air by removing 70 pints (33.0 litres) of water from an area up to approximately 3,800 square feet in size on a daily basis. The modern unit will also lower the room’s temperature naturally which can help save on air-conditioning costs. And since it’s Energy Star compliant even less power will be needed to create a comfortable atmosphere. You won’t do any damage to the environment either as it runs on ozone-friendly R410A refrigerant. The quiet high and low fan speeds and auto-humidity settings can be conveniently programmed and monitored via the electronic control pad with LED display. The practical direct-drainage system allows for continuous use while the progressive low-temperature feature makes sure the room never falls below 5°C (41°F). It’s convenient to relocate from room to room depending on your needs due to the handy built-in rolling castors. The automatic restart feature will turn the appliance back on after a power failure while the convenient automatic-de-icing system will keep the coils from freezing up. When it comes time to clean the filter it can easily be removed, washed, and quickly re-inserted. This graceful dehumidifier also features a 12-month warranty on parts and labour with carry-in service.
|Product Width||38.10 cm||15 1/4"|
|Product Depth||30.48 cm||12 3/16"|
|Product Height||58.42 cm||23 9/16"|
There are a couple of reasons this could be occurring. 1) There may not be enough humidity in your environment or 2) Your relative humidity set higher than ambient humidity. Please adjust your settings accordingly if this is the case.
It is supposed to be there to help determine the water level.
Information pertaining to watts and amps can be found on the rating plate located on the back of the unit.
We recommend setting your dehumidifier to between 40-50%.
Yes, usually this air feels warm.
This varies based on model, however most models have been manufactured to have the fan turn off automatically.
This varies based on model. With some models you simply screw the hose onto the outlet on the back of the unit. With other models you have to remove the bucket, feed the hose through the back of the unit and connect to the adaptor above the bucket area, then replace the bucket. It is important to look at your control panel. Some units have a “continuous drain” button on the control panel. If that is the case for your unit, you must press this button after the hose is in place or the function will not work. Please refer to your owner’s manual.
This will vary based on humidity level. It will pump out the water when it reaches a certain level (pump models only).
This varies by model, however all dehumidifiers are a one shot timer. Please refer to the owner’s manual for timer instruction.