Premiere 60 Pint DehumidifierDDR60A3GP
There aren’t too many people who feel comfortable sitting in a humid home and if you’re one of them you can find relief with this high-quality dehumidifier by Danby. The unit is designed to take out 60 pints of water (28.4 litres) every 24 hours and depending on the specific conditions can work its magic in areas up to 3,600 square feet in space. Unlike other Danby dehumidifiers which feature gravity drain systems, the water in the DDR60A3GP is conveniently removed via the internal condensate pump for easy pumped drainage. This model boasts the well-known Energy Star rating which means helps to conserve electricity and keep your costs down. The R410A refrigerant also makes it an environmentally-friendly device. The dual fan speeds can be easily set with the modern Electronic and remote-control system and the coils are kept free of ice buildup due to the automatic de-icing unit. The dehumidifier also has a clever auto-restart feature in case of a power failure and the low temperature device enables the machine to operate continuously until the temperature reaches 5ºC. Cleaning is a simple task with the handy removable air filter and the convenient castors make this model easy to transport. To top things off, this elite dehumidifier comes with a 24-month warranty on parts and labour.
|Product Width||38.10 cm||15 1/4"|
|Product Depth||30.48 cm||12 3/16"|
|Product Height||58.42 cm||23 9/16"|
- 60 U.S. pint (28.4 liter) capacity per 24 hours
- For areas up to 4,000 sq. ft. depending on conditions
- Energy Star® compliant
- Environmentally friendly R410A refrigerant
- Electronic controls
- 2 Fan speeds (High/Low)
- Low temperature feature allows the system to continue to operate until temperature reaches 41ºF (5ºC)
- Auto Restart feature
- Auto de-icer prevents ice build-up on coils
- Direct drain feature for continuous operation
- Removable air filter is easy to clean
- Castors for easy portability
- Internal condensate pump for easy drainage
24 months parts and labor. Installation and/or yearly maintenance (cleaning) are not covered under warranty.
There are a couple of reasons this could be occurring. 1) There may not be enough humidity in your environment or 2) Your relative humidity set higher than ambient humidity. Please adjust your settings accordingly if this is the case.
It is supposed to be there to help determine the water level.
Information pertaining to watts and amps can be found on the rating plate located on the back of the unit.
We recommend setting your dehumidifier to between 40-50%.
Yes, usually this air feels warm.
This varies based on model, however most models have been manufactured to have the fan turn off automatically.
This varies based on model. With some models you simply screw the hose onto the outlet on the back of the unit. With other models you have to remove the bucket, feed the hose through the back of the unit and connect to the adaptor above the bucket area, then replace the bucket. It is important to look at your control panel. Some units have a “continuous drain” button on the control panel. If that is the case for your unit, you must press this button after the hose is in place or the function will not work. Please refer to your owner’s manual.
This will vary based on humidity level. It will pump out the water when it reaches a certain level (pump models only).
This varies by model, however all dehumidifiers are a one shot timer. Please refer to the owner’s manual for timer instruction.