Designed for delightful owner support
Danby 45 Pint DehumidifierDDR45B3WDB
With Danby's 45 pint (21.3 liter) capacity dehumidifier, you won't have to worry about damp or humid basements, offices, or any room in the house again. This unit is perfect for eliminating moisture for areas up to 2,500 square feet. The smart dehumidify function will automatically control room humidity by factoring in ambient temperature. This Energy Star® rated unit will help cut down on electric bills and uses environmentally friendly R410a refrigerant to help you keep a peace of mind. This sleek unit has adjustable settings and two fan speeds (high/low) and electronic controls. This model is equipped with a smart dehumidifying function that allows the unit to automatically control room humidity by factoring in ambient temperature. Its direct-drainage system and removable filter make it simple to clean and its easy-roll castors make moving it from room to room a breeze. Additionally, this unit will continue to run quietly until the temperatures reaches 41F (5ºC), has an automatic de-icer to prevent frost build up and an automatic restart function in the event of a power failure. This model comes with our 2-year carry-in warranty.
|Product Width||39.19 cm||15.43"|
|Product Depth||28.30 cm||11.14"|
|Product Height||50.29 cm||19.80"|
|Package Width||42.60 cm||16.77"|
|Package Depth||31.19 cm||12.28"|
|Package Height||53.19 cm||20.94"|
- 45 Pint (21.3 L) Dehumidifier: controls humidity in spaces up to 2,500 sq. ft.
- Energy Star Rating
- Electronic controls with LED display
- Powerful 2 speed fan
- Smart Dehumidify: Unit will automatically control room humidity by factoring in ambient temperature
- Direct drain feature allows for continuous operation
- Auto restart: Unit automatically restarts after a power failure
- Auto de-icer: prevents frost build up
- 24 hour programmable timer
- Low temp function: Unit operates at temperatures as low as 5°C
- 4 castors for easy room to room transport
- Reusable, washable filter
- Environmentally friendly R410A refrigerant
24 months parts and labour coverage with carry-in service. Installation and/or yearly maintenance (cleaning) are not covered under warranty.
This feature varies according to the product you have. It is recommended to check the manual for detailed instructions. Some models require screwing the hose onto the outlet on the back of the unit. Other models require the hose to be fed through the back of the unit and connect to the adaptor above the bucket area, then replace the bucket.
The water produced by your Danby’s dehumidifiers is referred to as grey water. It is not suitable for drinking, but can be great for watering plants and flowers.
All Danby dehumidifiers offer both a bucket for collecting water which can be removed and emptied when full as well as a continuous drain which bypasses the bucket with the use of a hose and gravity to empty into a drain. Some models have a pump option.
Danby dehumidifiers come with reusable filters. You would only need to replace a filter if it becomes damaged.
Danby’s dehumidifiers operate at a sound level between 50 and 56 decibels. This is within the normal decibel range for modern “quiet” dehumidifiers.
Danby dehumidifiers uses 2.2 to 4.1 Amps, and 250 to 420 Watts, based on this year’s model, varying with size.
There are a couple of reasons this could be occurring. 1) There may not be enough humidity in your environment or 2) Your relative humidity set higher than ambient humidity. Please adjust your settings accordingly if this is the case.
It is supposed to be there to help determine the water level.
We recommend setting your dehumidifier to between 40-50%.
Yes, usually this air feels warm.
This varies based on model, however most models have been manufactured to have the fan turn off automatically.
This will vary based on humidity level. It will pump out the water when it reaches a certain level (pump models only).
This varies by model, however all dehumidifiers are a one shot timer. Please refer to the owner’s manual for timer instruction.