Danby 30 Pint DehumidifierDDR030BDWDB
Get rid of unwanted moisture from your home with this 30-pint dehumidifier by Danby. This dehumidifier removes up to 30 pints (14.2 litres) of moisture in a 24 hour period and is ideal for spaces up to 1,500 square feet. The smart dehumidify function will automatically control room humidity by factoring in ambient temperature. The automatic shutoff feature prevents the bucket from overflowing and with the direct drain feature you have the option of continuous operation. Energy Star rated, this unit also comes with a 24-hour timer that allows you to run your Danby dehumidifier during off-peak hours to help save on your monthly hydro bill. If you're planning to use this unit somewhere cold like a basement, the automatic de-icer feature allows the unit to run in temperatures as low as 41ºF (5ºC).
|Product Width||38.58 cm||15 3/16"|
|Product Depth||27.78 cm||10 15/16"|
|Product Height||50.17 cm||19 12/16"|
|Package Width||53.01 cm||20.87"|
|Package Depth||29.69 cm||11.69"|
|Package Height||42.01 cm||16.54"|
- Controls humidity in spaces up to 1,500 sq. ft.
- Energy Star® compliant
- Environmentally friendly R410A refrigerant
- Smart dehumidify function: Unit will automatically control room humidity by factoring in ambient temperature
- Electronic controls with LED display
- Powerful 2 speed fan
- Low temperature feature allows the system to continue to operate at temperatures as low as 5ºC (41ºF)
- Auto Restart: unit automatically restarts after a power failure
- Auto de-icer prevents frost build up
- Direct drain feature allows for continuous operation
- Reusable, washable air filter
- 4 castors for easy room to room transport
There are a couple of reasons this could be occurring. 1) There may not be enough humidity in your environment or 2) Your relative humidity set higher than ambient humidity. Please adjust your settings accordingly if this is the case.
We recommend setting your dehumidifier to between 40-50%.
Information pertaining to watts and amps can be found on the rating plate located on the back of the unit.
It is supposed to be there to help determine the water level.
Yes, usually this air feels warm.
This varies based on model, however most models have been manufactured to have the fan turn off automatically.
This varies based on model. With some models you simply screw the hose onto the outlet on the back of the unit. With other models you have to remove the bucket, feed the hose through the back of the unit and connect to the adaptor above the bucket area, then replace the bucket. It is important to look at your control panel. Some units have a “continuous drain” button on the control panel. If that is the case for your unit, you must press this button after the hose is in place or the function will not work. Please refer to your owner’s manual.
This varies by model, however all dehumidifiers are a one shot timer. Please refer to the owner’s manual for timer instruction.
This will vary based on humidity level. It will pump out the water when it reaches a certain level (pump models only).