ArcticAire 50 Pint DehumidifierADR50B1G This product is no longer available.
Dampness in your home isn’t just uncomfortable. It can also be quite damaging and unhealthy. The best way to eliminate unneeded and unwanted moisture from humid air is with a dehumidifier such as this sleek, portable unit from Danby. This potent machine can effectively do away with about 50 pints (23.7 litres) of water from the air every 24 hours. It’s just right for large rooms as well as offices, apartments and condos. Your electricity bills will be kept in check as the unit is Energy Star compliant as well as being environmentally friendly due to its R410A refrigerant. The contemporary electronic controls with LED display make it easy to program the humidity settings and quiet two-speed fan. The smart appliance features a low-temperature component which enables it to run on a continuous basis until the temperature drops to 5°C (41°F). There’s a handy automatic restart device in case of a power failure and the coils are kept free of ice with the automatic de-icing system. Cleaning is effortless due to the removable filter and the intelligent dehumidifier can operate continuously with its direct-drainage system. This model can easily be transported from room to room with its built-in rolling castors and it also features a 24-month warranty on parts and labour with carry-in service.
|Product Width||39.05 cm||15 3/8"|
|Product Depth||27.94 cm||11"|
|Product Height||59.06 cm||23 1/4"|
There are a couple of reasons this could be occurring. 1) There may not be enough humidity in your environment or 2) Your relative humidity set higher than ambient humidity. Please adjust your settings accordingly if this is the case.
It is supposed to be there to help determine the water level.
Information pertaining to watts and amps can be found on the rating plate located on the back of the unit.
We recommend setting your dehumidifier to between 40-50%.
Yes, usually this air feels warm.
This varies based on model, however most models have been manufactured to have the fan turn off automatically.
This varies based on model. With some models you simply screw the hose onto the outlet on the back of the unit. With other models you have to remove the bucket, feed the hose through the back of the unit and connect to the adaptor above the bucket area, then replace the bucket. It is important to look at your control panel. Some units have a “continuous drain” button on the control panel. If that is the case for your unit, you must press this button after the hose is in place or the function will not work. Please refer to your owner’s manual.
This will vary based on humidity level. It will pump out the water when it reaches a certain level (pump models only).
This varies by model, however all dehumidifiers are a one shot timer. Please refer to the owner’s manual for timer instruction.