ArcticAire 30 Pint DehumidifierADR30B1G
You’ll never have to worry about damp, stale air again with this elite 30-pint (14.2 litre) capacity dehumidifier from Danby. This portable Energy Star-compliant unit will minimize electricity costs and is ideal for areas up to 1,500 square feet in size. It runs on R410A refrigerant, making it very environmentally friendly and the quiet two-speed fan is perfect for circulating the air. The attractive model comes with easy-to-use electronic controls with a LED display feature as well as an automatic-restart component. The unit’s low-temperature element and direct-drain features enable it to operate continuously until the temperature reaches 5°C (41°F) while the smart automatic de-icing system makes sure that the coils stay ice free. The adjustable humidity settings can be programmed quite effortlessly and the air filter is removable making it as easy as pie to clean. This solid dehumidifier can easily be moved from room to room due to the built-in castors and it comes with a 24-month warranty on parts and labour with carry-in service.
|Product Width||36.04 cm||14 3/16"|
|Product Depth||26.04 cm||10 1/4"|
|Product Height||50.96 cm||20 1/16"|
- 30 pint (14.2 litre) capacity dehumidifier per 24 hours
- For areas up to 1500 sq. ft. depending on conditions
- Energy Star® compliant
- Environmentally friendly R410a refrigerant
- Electronic controls with LED display
- Quiet operation
- Adjustable humidity settings
- Auto de-icer prevents ice build-up on coils
- Removable air filter is easy to clean
- 2 fan speeds
- ow temperature feature allows the system to continue to operate until temperature reaches 5ºC (41ºF)
- Auto Restart feature
- Direct drain system allows for continuous operation
24 month parts and labour coverage with carry-in service. Installation and/or Yearly Maintenance (cleaning) are not covered under warranty.
It is supposed to be there to help determine the water level.
We recommend setting your dehumidifier to between 40-50%.
Information pertaining to watts and amps can be found on the rating plate located on the back of the unit.
Yes, usually this air feels warm.
There are a couple of reasons this could be occuring. 1) There may not be enough humidity in your environment or 2) Your relative humidity set higher than ambient humidity. Please adjust your settings accordingly if this is the case.
This will vary based on humidity level. It will pump out the water when it reaches a certain level (pump models only).
This varies based on model, however most models have been manufactured to have the fan turn off automatically.
This is not recommended, as the unit is built to operate using the drain hose/power cord provided.
This varies by model, however all dehumidifiers are a one shot timer. Please refer to the owner’s manual for timer instruction.
This varies based on model. With some models you simply screw the hose onto the outlet on the back of the unit. With other models you have to remove the bucket, feed the hose through the back of the unit and connect to the adaptor above the bucket area, then replace the bucket. It is important to look at your control panel. Some units have a “continuous drain” button on the control panel. If that is the case for your unit, you must press this button after the hose is in place or the function will not work. Please refer to your owner’s manual.