Danby 11000 BTU Portable Air Conditioner

SKU: DPAC11006 Category:
This product has been discontinued.
  • 3-in-1 Home Comfort System Air Conditioner: 11,000 BTU cooling capacity Cools areas up to 475 sq. ft. based on the conditions Dehumidifier: 70 U.S pint per 24 hours (33.1 litres) Fan: 3 fan speeds (High – Med – Low) External bucket capacity: 31.7 US pints (15 litres) Electronic controls with remote Direct drain option for continuous operation 4 way air direction Variable electronic temperature control 16°C ~ 31°C Quiet operation Castors for easy portability

Compare
Specifications
Product Dimensions
  • Product Width
    17 1/2"
    43.18 cm
  • Product Depth
    20"
    50.80 cm
  • Product Height
    33.6875"
    85.57 cm
    Weight
    • Package Weight
      115 lbs
      52.16 kg
    Downloads
      Warranty

      12 months parts and labor coverage with in-home service. Installation and/or yearly maintenance (cleaning) are not covered under warranty.

      FAQs
      We do not recommend using an extension cord.
      Square feet is calculated by multiplying the length by the width.  For example, a room that is 10 feet long by 25 feet wide is 250 square feet.
      The water drains from the drainage port. If you are not using the continuous drain, the internal pan drains from the bottom outlet. Consult your owner's manual for more information.
      During heat mode, dry mode or continuous draining. Please consult your owner's manuals for more details.
      This is not recommended, as the unit is built to operate using the drain hose/power cord provided.
      Units with three drainage ports are units which also feature heat mode. The bottom drainage port empties the internal pan, the middle port is for continuous drain during heat and the top port is for continuous drain during dry mode. Please consult your owner's manual for more detail.
      Dual hose models have an intake and exhaust hose. With single hose models, the hose exhausts and the air that is to be conditioned is taken in from the room through the unit.
      No, this is not recommended. Please bring your AC unit indoors during the winter months.
      On most models with heat mode, it is advised to use the hose for direct drain. This will ensure the pan does not fill up too quickly.
      When selected, this automatically sets the appropriate option for your room based on the ambient temperature. For example, if it is 15°C outside, the unit would flip to fan mode. If it is set to 30°C, the unit would revert back to cooling mode.
      There are a few things to check to ensure this doesn't happen: Ensure that the hose is properly installed at both ends and this should minimize heat escape.Ensure the hose is not over extended. Keep the unit as close the window/patio as possible.Ensure the unit is in an area where it's getting lots of air circulation, which allows the unit to run cooler and results in less heat escaping.If the heat is escaping from the exhaust port then the hose is either restricted or not installed properly.Unfortunately, it is not possible to completely stop all heat loss from escaping.
      The water drains from the drainage port. If you are not using the continuous drain, the internal pan drains from the bottom outlet. Consult your owner’s manual for more information. Note: while in Cool mode it is important to not drain the water from the unit as it is designed to use the collected water in the cooling process.
      You should always use it during cooling and heating. In most models it should be removed while using fan and dry mode as it is not required. Please consult your owner’s manuals for more details.
      Danby portable air conditioners have a sound rating from 38 decibels to 56 decibels.  The exact decibel range is determined by the model of the unit and the mode (fan, cool or heat if available with the model). Danby also has a patented Silencer Technology available on several models that will keep your home cool and comfortable while operating at a 46 decibel to 49 decibel range.
      When automatic mode is selected, this automatically sets the appropriate option for your room based on the set temperature and the ambient temperature. For example, if it is 15°C outside, the unit would flip to fan mode if the set temperature was above 15. If it is set to 25°C the unit would revert to cooling mode. The unit would not revert to cooling mode unless the temperature outside was over 25.
      Danby air conditioners are designed to cool a single room and not multiple rooms.  Any walls or doors will interfere with the air flow.