Danby Designer 8 DishwasherDDW1805W This product is no longer available.
One of a kind best describes Danby's compact portable dishwasher. At 18" wide this model takes up a minimum of space and the built-in castors allow it to be easily moved out of the way or out of the room. Energy star rated and boasting a low-water consumption feature, this model is eco-friendly. Suitable for not only condos and apartment this model even offers a built in soft water system for remote cottage locations.
|Product Depth||93.98 cm||37"|
- 8 Place Setting Capacity
- Energy star compliant
- Large Lower Dish Rack and Silverware Basket
- Dish Rack accommodates plates 11" in diameter
- Adjustable Upper Dish Rack
- 7 Wash Programs
- Three Tier Spray Wash System
- Rinse Agent Dispenser
- Maximum temperature allows for sani-wash option
- Automatic Detergent Dispenser
- Low Water Consumption (Normal/Short programs) 3.8 gallons (14.5 L)
- Quiet Operation (55 dB)
- Convenient hose storage
- Built-in Castors for easy movement
- Durable Stainless Steel Interior Tub
Please refer to your product on www.danby.com.
Information pertaining to watts and amps can be found on the rating plate located on the back of the unit.
Our units are designed to fit standard North American faucets.
Please refer to your owner’s manual for specifications on how much room is needed between the unit and each adjacent wall.
Salt is not needed, however it is recommended. Note that if you do not use salt, the unit will still function, however the indicator light will remain illuminated.
Rinse aid is not needed, however it is recommended. Note that if you do not use rinse aid, although the unit will still function, the rinse aid indicator light will remain illuminated.
Check to make sure that the filters and drainage area are not clogged.
Try setting the unit to a high temperature. The unit can take up to 2 hours to heat up the cold water depending on the temperature setting.
There is a protective layer of plastic that protects your control panel during transportation. This should be removed during installation.