Skip to content

Simplicity 50 BTU Dehumidifier

SDR505R This product is no longer available.
  • Energy Star
  • Simplicity 50 BTU Dehumidifier - SDR505R
Simplicity

Simplicity 50 BTU Dehumidifier

SDR505R

Limited Quantity

  • Energy Star
  • Light Grey
Do the Right Thing.

Description

Danby, the market leader in portable dehumidifiers, offers a wide variety of sizes and designs to fit your lifestyle.

Specifications

Dimensions
Product Width 33.50 cm 13 3/16"
Product Depth 34.93 cm 13 3/4"
Product Height 77.47 cm 30 8/16"
Weight
Shipping Weight 28.00kg 61.73lb
Capacity
Loading Capacity
  • 50 BTU
  • 50 Pints
  • 23.6 Liters
Package Dimensions
Package Width N/A
Package Depth N/A
Package Height N/A

Features

  • 50 U.S. pint (23.6 Liter) capacity per 24 hours
  • For areas up to 3,000 sq. ft. based on the conditions
  • Energy star compliant
  • Electronic controls with remote
  • Direct drain option for continuous operation
  • Automatic Humidistat Control Starts/stops dehumidifier automatically
  • 2 fan speeds (High ? Low)
  • Low Temperature operation- continues to operate until temperature reached 44F (6.6C)
  • Super quiet operation
  • Removable air filter

FAQs

It is supposed to be there to help determine the water level.
We recommend setting your dehumidifier to between 40-50%.
Information pertaining to watts and amps can be found on the rating plate located on the back of the unit.
There are a couple of reasons this could be occuring. 1) There may not be enough humidity in your environment or 2) Your relative humidity set higher than ambient humidity. Please adjust your settings accordingly if this is the case.
This will vary based on humidity level. It will pump out the water when it reaches a certain level (pump models only).
This varies based on model, however most models have been manufactured to have the fan turn off automatically.
This is not recommended, as the unit is built to operate using the drain hose/power cord provided.
This varies by model, however all dehumidifiers are a one shot timer. Please refer to the owner’s manual for timer instruction.
This varies based on model. With some models you simply screw the hose onto the outlet on the back of the unit. With other models you have to remove the bucket, feed the hose through the back of the unit and connect to the adaptor above the bucket area, then replace the bucket. It is important to look at your control panel. Some units have a “continuous drain” button on the control panel. If that is the case for your unit, you must press this button after the hose is in place or the function will not work. Please refer to your owner’s manual.