Skip to content

Premiere 70 Pint Dehumidifier

DDR70B3WP This product is no longer available.
  • Energy Star
  • Premiere 70 Pint Dehumidifier - DDR70B3WP
Premiere

Premiere 70 Pint Dehumidifier

DDR70B3WP

Limited Quantity

  • Energy Star
  • White
Do the Right Thing.

Description

Danby offers a solution with this 70 pint (33.1 litres) portable dehumidifier. This unit works best in an area of up to 4,500 square feet. With its Energy Star® rating and environmentally-friendly R410a refrigerant, this unit will cut your electricity bills and help the ozone layer. Between a low and high fan speed, you are able to control either speeds with its electronic digial panel. The de-icing feature will ensure that your coils will always be ice-free. There’s a low-temperature feature which enables the dehumidifier to operate in temperatures as low as 5ºC (41F). If you want to move this dehumidifier to another room, the castors with this attractive unit make it convenient to transport.

Specifications

Dimensions
Product Width 40.96 cm 16 1/8"
Product Depth 30.00 cm 11 13/16"
Product Height 61.60 cm 24 1/4"
Weight
Shipping Weight 21.30kg 46.96lb

Features

  • 70 U.S. pint (33.1 litre) capacity per 24 hours
  • For areas up to 4,500 sq. ft. depending on conditions
  • Energy Star® compliant
  • Environmentally friendly R410A refrigerant
  • Electronic controls
  • 2 Fan speeds (High - Low)
  • Low temperature feature allows the system to continue to operate until temperature reaches 5ºC
  • Auto Restart feature
  • Auto de-icer prevents ice build-up on coils
  • Direct drain feature for continuous operation
  • Removable air filter is easy to clean
  • Castors for easy portability

Warranty

24 months parts and labor. Installation and/or Yearly Maintenance (cleaning) are not covered under warranty.

FAQs

This feature varies according to the product you have. It is recommended to check the manual for detailed instructions. Some models require screwing the hose onto the outlet on the back of the unit. Other models require the hose to be fed through the back of the unit and connect to the adaptor above the bucket area, then replace the bucket.
The water produced by your Danby’s dehumidifiers is referred to as grey water. It is not suitable for drinking, but can be great for watering plants and flowers.
All Danby dehumidifiers offer both a bucket for collecting water which can be removed and emptied when full as well as a continuous drain which bypasses the bucket with the use of a hose and gravity to empty into a drain.  Some models have a pump option.
Danby dehumidifiers come with reusable filters.  You would only need to replace a filter if it becomes damaged.
Danby’s dehumidifiers operate at a sound level between 50 and 56 decibels. This is within the normal decibel range for modern “quiet” dehumidifiers.
Danby dehumidifiers uses 2.2 to 4.1 Amps, and 250 to 420 Watts, based on this year’s model, varying with size.
It is supposed to be there to help determine the water level.
We recommend setting your dehumidifier to between 40-50%.
There are a couple of reasons this could be occuring. 1) There may not be enough humidity in your environment or 2) Your relative humidity set higher than ambient humidity. Please adjust your settings accordingly if this is the case.
This will vary based on humidity level. It will pump out the water when it reaches a certain level (pump models only).
This varies based on model, however most models have been manufactured to have the fan turn off automatically.
This is not recommended, as the unit is built to operate using the drain hose/power cord provided.
This varies by model, however all dehumidifiers are a one shot timer. Please refer to the owner’s manual for timer instruction.
Follow Us on