Designed for delightful owner support
Premiere 45 Pint DehumidifierDDR45B1GP This product is no longer available.
Damp and dingy basements, rooms and offices are a thing of the past with this elegant 45 pint (21.3 litre) capacity Danby dehumidifier. This unit is just what the doctor ordered if you’re trying to eliminate excess moisture from areas up to 2,500 square feet in size. You’ll be able to cut down on electricity bills with this clever Energy Star-compliant model and you’ll certainly become a friend of the environment with its R410a refrigerant. The appliance features adjustable humidity settings and a pair of fan speeds which can easily be controlled electronically. The quiet operation will allow you to sleep well and concentrate on other things while it’s running. Ice build-up on the coils is a thing of the past as the auto de-icing system eliminates the problem. The dehumidifier can keep running until the temperature reaches 5ºC (41F) with sharp low-temperature feature. It also comes with a direct-drainage system and easy-roll castors for moving it about. Cleaning this model is also a breeze as the filter can easily be removed.
|Product Width||36.04 cm||14 3/16"|
|Product Depth||26.04 cm||10 1/4"|
|Product Height||50.80 cm||20"|
- 45 pint (21.3 litre) capacity dehumidifier per 24 hours
- For areas up to 2500 sq. ft. depending on conditions
- Energy Star® compliant
- Environmentally friendly R410a refrigerant
- Electronic controls
- Adjustable humidity settings
- Quiet operation
- Auto de-icer prevents ice build-up on coils
- Removable air filter is easy to clean
- 2 fan speeds
- Low temperature feature allows the system to continue to operate until temperature reaches 5ºC
- Direct drain feature for continuous operation
- Easy-roll castors for smooth portability
24 months parts and labour coverage with carry-in service. Installation and/or Yearly Maintenance (cleaning) are not covered under warranty.
This feature varies according to the product you have. It is recommended to check the manual for detailed instructions. Some models require screwing the hose onto the outlet on the back of the unit. Other models require the hose to be fed through the back of the unit and connect to the adaptor above the bucket area, then replace the bucket.
The water produced by your Danby’s dehumidifiers is referred to as grey water. It is not suitable for drinking, but can be great for watering plants and flowers.
All Danby dehumidifiers offer both a bucket for collecting water which can be removed and emptied when full as well as a continuous drain which bypasses the bucket with the use of a hose and gravity to empty into a drain. Some models have a pump option.
Danby dehumidifiers come with reusable filters. You would only need to replace a filter if it becomes damaged.
Danby’s dehumidifiers operate at a sound level between 50 and 56 decibels. This is within the normal decibel range for modern “quiet” dehumidifiers.
Danby dehumidifiers uses 2.2 to 4.1 Amps, and 250 to 420 Watts, based on this year’s model, varying with size.
It is supposed to be there to help determine the water level.
We recommend setting your dehumidifier to between 40-50%.
Yes, usually this air feels warm.
There are a couple of reasons this could be occuring. 1) There may not be enough humidity in your environment or 2) Your relative humidity set higher than ambient humidity. Please adjust your settings accordingly if this is the case.
This will vary based on humidity level. It will pump out the water when it reaches a certain level (pump models only).
This varies based on model, however most models have been manufactured to have the fan turn off automatically.
This is not recommended, as the unit is built to operate using the drain hose/power cord provided.
This varies by model, however all dehumidifiers are a one shot timer. Please refer to the owner’s manual for timer instruction.