Premiere 30 Pint DehumidifierDDR30B1GP This product is no longer available.
This sturdy model is an ideal way to remove moisture from the air in basements and any other areas up to approximately 1,500 square feet in size. It wont cost an arm and leg to operate as it is Energy Star compliant and runs on environmentally-friendly R410A refrigerant. This appliance features a user-friendly electronic control panel as well as an automatic defrosting system to keep the coils ice-free and adjustable humidity settings. The quiet two-speed fan and automatic restart function are accompanied by a removable filter for convenient and easy cleaning. The unit's clever low- temperature component continues to run until the temperature drops to 5°C (41°F) and the convenient direct-drain system allows it to operate continuously. The built-in castors make it simple to relocate the dehumidifier and it also has a 24-month carry-in service warranty on parts and labour.
|Product Width||36.04 cm||14.19"|
|Product Depth||26.04 cm||10.25"|
|Product Height||50.80 cm||20"|
- 30 pint (14.2 litre) capacity dehumidifier per 24 hours
- For areas up to 1500 sq. ft. depending on conditions
- Energy Star® compliant
- Environmentally friendly R410a refrigerant
- Electronic controls
- Quiet operation
- Adjustable humidity settings
- Auto de-icer prevents ice build-up on coils
- Removable air filter is easy to clean
- 2 fan speeds
- Low temperature feature allows the system to continue to operate until temperature reaches 5ºC
24 months parts and labour coverage with carry-in service. Installation and/or Yearly Maintenance (cleaning) are not covered under warranty.
It is supposed to be there to help determine the water level.
We recommend setting your dehumidifier to between 40-50%.
Yes, usually this air feels warm.
There are a couple of reasons this could be occuring. 1) There may not be enough humidity in your environment or 2) Your relative humidity set higher than ambient humidity. Please adjust your settings accordingly if this is the case.
This will vary based on humidity level. It will pump out the water when it reaches a certain level (pump models only).
This varies based on model, however most models have been manufactured to have the fan turn off automatically.
This is not recommended, as the unit is built to operate using the drain hose/power cord provided.
This varies by model, however all dehumidifiers are a one shot timer. Please refer to the owner’s manual for timer instruction.
This varies based on model. With some models you simply screw the hose onto the outlet on the back of the unit. With other models you have to remove the bucket, feed the hose through the back of the unit and connect to the adaptor above the bucket area, then replace the bucket. It is important to look at your control panel. Some units have a “continuous drain” button on the control panel. If that is the case for your unit, you must press this button after the hose is in place or the function will not work. Please refer to your owner’s manual.