Designed for delightful owner support
Danby 4,500 Sq.ft. DehumidifierDDR070BECCDB
This classic 70 pint (33.1litre) capacity portable dehumidifier. It will help eliminate up to 70 pints of moisture from the air every 24 hours in spaces up to 4,500 square feet. The unit helps cut down on power bills due to its Energy Star rating and the R410A refrigerant used is very environmentally friendly. You have the option of a low and high fan speed and they can easily be controlled by the electronic digital panel. You won’t get a buildup of ice on the coils as the automatic de-icing feature takes care of this. There’s a low-temperature feature which enables the dehumidifier to operate in temperatures as low as 5ºC (41F). it can also operate continuously because of the convenient direct-drain system and there’s also a handy automatic-restart device. When you’re ready to dehumidify another room you can easily transport the appliance by rolling it on the built-in castors. Cleaning is just as easy as the filter can be removed and washed.
|Product Width||39.05 cm||15 6/16"|
|Product Depth||27.94 cm||11"|
|Product Height||59.06 cm||23 4/16"|
- 70 U.S. pint (33.1 litre) capacity per 24 hours
- For areas up to 4,500 sq. ft. depending on conditions
- Energy Star® compliant
- Environmentally friendly R410A refrigerant
- Electronic controls
- 2 Fan speeds (High/Low)
- Low temperature feature allows the system to continue to operate at temperatures as low as 5ºC (41ºF)
- Auto Restart: unit automatically restarts after a power failure
- Auto de-icer prevents frost build up
- Direct drain feature allows for continuous operation
- Reusable, washable air filter
- 4 castors for easy room to room transport
24 month warranty on parts and labour. Installation and/or yearly maintenance (cleaning) are not covered under warranty.
This feature varies according to the product you have. It is recommended to check the manual for detailed instructions. Some models require screwing the hose onto the outlet on the back of the unit. Other models require the hose to be fed through the back of the unit and connect to the adaptor above the bucket area, then replace the bucket.
The water produced by your Danby’s dehumidifiers is referred to as grey water. It is not suitable for drinking, but can be great for watering plants and flowers.
All Danby dehumidifiers offer both a bucket for collecting water which can be removed and emptied when full as well as a continuous drain which bypasses the bucket with the use of a hose and gravity to empty into a drain. Some models have a pump option.
Danby dehumidifiers come with reusable filters. You would only need to replace a filter if it becomes damaged.
Danby’s dehumidifiers operate at a sound level between 50 and 56 decibels. This is within the normal decibel range for modern “quiet” dehumidifiers.
Danby dehumidifiers uses 2.2 to 4.1 Amps, and 250 to 420 Watts, based on this year’s model, varying with size.
It is supposed to be there to help determine the water level.
We recommend setting your dehumidifier to between 40-50%.
Yes, usually this air feels warm.
There are a couple of reasons this could be occuring. 1) There may not be enough humidity in your environment or 2) Your relative humidity set higher than ambient humidity. Please adjust your settings accordingly if this is the case.
This will vary based on humidity level. It will pump out the water when it reaches a certain level (pump models only).
This varies based on model, however most models have been manufactured to have the fan turn off automatically.
This is not recommended, as the unit is built to operate using the drain hose/power cord provided.
This varies by model, however all dehumidifiers are a one shot timer. Please refer to the owner’s manual for timer instruction.