ArcticAire 70 BTU DehumidifierADR70A1C This product is no longer available.
You can create a comfortable living environment with this well-designed portable 70 pint (33.1) dehumidifier. It can fulfill all of dehumidifying needs in spaces up to 3,800 square feet. This model uses non-ozone depleting refrigerant and it can be easily programmed via the electronic digital panel and remote control. You don’t need to worry if there’s a power outage since the unit will start up automatically once it’s back on with the auto restart feature. The dehumidifier can operate in temperatures as low as 5ºC (41F) and the direct drain system allows it to run continuously. The two-speed fan will circulate the air quietly and the Energy Star rating means you’ll use less power to operate the appliance.
|Product Width||38.74 cm||15 1/4"|
|Product Depth||28.26 cm||11 1/8"|
|Product Height||60.01 cm||23 5/8"|
- 70 pint dehumidifier covers approximately 3,800 sq.ft.
- Non ozone depleting refrigerant
- Electronic controls with remote
- Digital key pad with LED display is easy to use
- Create a comfortable environment with our programmable humidity settings
- Auto Restart feature - restarts the unit after a power outage
- Low temperature feature allows the system to continue to operate until temperature reaches 5ºC
- 2 speed fan circulates the air
- Direct drain feature for continuous operation
It is supposed to be there to help determine the water level.
We recommend setting your dehumidifier to between 40-50%.
This will vary based on humidity level. It will pump out the water when it reaches a certain level (pump models only).
There are a couple of reasons this could be occuring. 1) There may not be enough humidity in your environment or 2) Your relative humidity set higher than ambient humidity. Please adjust your settings accordingly if this is the case.
Yes, usually this air feels warm.
Information pertaining to watts and amps can be found on the rating plate located on the back of the unit.
This varies based on model. With some models you simply screw the hose onto the outlet on the back of the unit. With other models you have to remove the bucket, feed the hose through the back of the unit and connect to the adaptor above the bucket area, then replace the bucket. It is important to look at your control panel. Some units have a “continuous drain” button on the control panel. If that is the case for your unit, you must press this button after the hose is in place or the function will not work. Please refer to your owner’s manual.
This varies by model, however all dehumidifiers are a one shot timer. Please refer to the owner’s manual for timer instruction.
This is not recommended, as the unit is built to operate using the drain hose/power cord provided.
This varies based on model, however most models have been manufactured to have the fan turn off automatically.