ArcticAire 30 BTU DehumidifierADR30A1G This product is no longer available.
Structural damage from humidity and allergy-triggering mold can be eliminated from your room or basement with this portable 30 pint (14.2 litre) dehumidifier. It’s designed to get rid of damaging moisture in areas up to 2,000 square feet. This premier unit features a user-friendly electronic control panel as well as an automatic defrost. The Energy Star-compliant model helps cut down on electricity bills and features adjustable humidity settings. The quiet two-speed fan and automatic restart feature are accompanied by a removable filter for convenient and easy cleaning. The dehumidifier’s low- temperature component continues to operate until the temperature hits 6.6C (44F) and the direct-drain system enables it to operate continuously. If you’d like to move the appliance to another room it can easily be done via the built-in castors.
|Product Width||33.97 cm||13 3/8"|
|Product Depth||26.35 cm||10 3/8"|
|Product Height||53.98 cm||21 1/4"|
- 30 pint (14.2 L) dehumidifier covers approximately 2000 sq ft
- Energy Star compliant
- Electronic controls
- Adjustable humidity settings
- 2 speed fan
- Low temperature feature - continues to operate until temperature reaches 44F (6.6C)
- Auto de-icer prevents ice build-up on coils
- Auto Restart feature
- Removable filter for easy cleaning
- Quiet operation
- Castors for easy portability
- Direct drain system allows for continuous operation
It is supposed to be there to help determine the water level.
We recommend setting your dehumidifier to between 40-50%.
This will vary based on humidity level. It will pump out the water when it reaches a certain level (pump models only).
There are a couple of reasons this could be occuring. 1) There may not be enough humidity in your environment or 2) Your relative humidity set higher than ambient humidity. Please adjust your settings accordingly if this is the case.
Yes, usually this air feels warm.
Information pertaining to watts and amps can be found on the rating plate located on the back of the unit.
This varies based on model. With some models you simply screw the hose onto the outlet on the back of the unit. With other models you have to remove the bucket, feed the hose through the back of the unit and connect to the adaptor above the bucket area, then replace the bucket. It is important to look at your control panel. Some units have a “continuous drain” button on the control panel. If that is the case for your unit, you must press this button after the hose is in place or the function will not work. Please refer to your owner’s manual.
This varies by model, however all dehumidifiers are a one shot timer. Please refer to the owner’s manual for timer instruction.
This is not recommended, as the unit is built to operate using the drain hose/power cord provided.
This varies based on model, however most models have been manufactured to have the fan turn off automatically.