Skip to content

Danby 55 BTU Dehumidifier

DDR5511R This product is no longer available.
  • Energy Star
  • Danby 55 BTU Dehumidifier - DDR5511R

Danby 55 BTU Dehumidifier


Limited Quantity

  • Energy Star
Do the Right Thing.


Danby, the market leader in portable dehumidifiers, offers a wide variety of sizes and designs to fit your lifestyle.


Product Width 39.53 cm 15 9/16"
Product Depth 35.56 cm 14"
Product Height 60.80 cm 23.9375"
Shipping Weight 23.50kg 51.81lb
Package Dimensions
Package Width N/A
Package Depth N/A
Package Height N/A


  • 55 pint (26 litre) capacity dehumidifier per 24 hours
  • For areas up to 3300 sq. ft. depending on conditions
  • Energy Star® compliant
  • 1200 watt heater provides supplemental heat to your living area
  • Environmentally friendly R410a refrigerant
  • Electronic controls
  • Remote control
  • 2 fan speeds
  • Quiet operation
  • Adjustable humidity settings
  • Auto de-icer prevents ice build-up on coils
  • Removable air filter is easy to clean


12 months parts and labor coverage.
Installation and/or Yearly Maintenance (cleaning) are not covered under warranty.


It is supposed to be there to help determine the water level.
We recommend setting your dehumidifier to between 40-50%.
There are a couple of reasons this could be occuring. 1) There may not be enough humidity in your environment or 2) Your relative humidity set higher than ambient humidity. Please adjust your settings accordingly if this is the case.
This will vary based on humidity level. It will pump out the water when it reaches a certain level (pump models only).
This varies based on model, however most models have been manufactured to have the fan turn off automatically.
This is not recommended, as the unit is built to operate using the drain hose/power cord provided.
This varies by model, however all dehumidifiers are a one shot timer. Please refer to the owner’s manual for timer instruction.
This varies based on model. With some models you simply screw the hose onto the outlet on the back of the unit. With other models you have to remove the bucket, feed the hose through the back of the unit and connect to the adaptor above the bucket area, then replace the bucket. It is important to look at your control panel. Some units have a “continuous drain” button on the control panel. If that is the case for your unit, you must press this button after the hose is in place or the function will not work. Please refer to your owner’s manual.
Follow Us on