Danby 45 Pint DehumidifierDDR45A3GDB
This portable 45-pint (21.3 litre) dehumidifier is popular with homeowners who are determined to keep their rooms less humid and more comfortable. The classy and efficient unit is Energy Star-rated to help keep electricity costs down and the R410A refrigerant is environmentally friendly as it won’t deplete the ozone layer. It’s designed to remove up to 45 pints of excess moisture every 24 hours from spaces up to approximately 2,500 square feet in size, making it an ideal option for apartments, condos, offices and large rooms. The unit comes with low and high fan speeds and can be programmed, controlled and monitored electronically with the state-of-the-art digital keypad. This appliance features an automatic de-icing system to ensure the coils don’t freeze and a removable air filter for quick and easy cleaning. The automatic-restart function will turn the unit back on after a power outage while the handy low-temperature feature will run the apparatus continuously until the temperature reaches 5°C (41°F). The dehumidifier is also able to operate continuously because of the trendy direct-drain design. This elegant model has built-in rolling castors for easy portability as well as an attractive 12-month warranty on parts and labour with carry-in service.
|Product Width||33.97 cm||13 3/8"|
|Product Depth||26.35 cm||10 3/8"|
|Product Height||53.98 cm||21 1/4"|
- 45 U.S. pint (21.3 litre) capacity per 24 hours
- For areas up to 2,500 sq. ft. depending on conditions
- Energy Star® compliant
- Environmentally friendly R410A refrigerant
- Electronic controls
- 2 Fan speeds (High - Low)
- Auto Restart feature
- Low temperature feature allows the system to continue to operate until temperature reaches 5ºC
- Auto de-icer prevents ice build-up on coils
- Direct drain feature for continuous operation
- Removable air filter is easy to clean
- Castors for easy portability
12 month parts and labor carry-in service. Installation and/or Yearly Maintenance (cleaning) are not covered under warranty.
It is supposed to be there to help determine the water level.
We recommend setting your dehumidifier to between 40-50%.
Information pertaining to watts and amps can be found on the rating plate located on the back of the unit.
Yes, usually this air feels warm.
There are a couple of reasons this could be occuring. 1) There may not be enough humidity in your environment or 2) Your relative humidity set higher than ambient humidity. Please adjust your settings accordingly if this is the case.
This will vary based on humidity level. It will pump out the water when it reaches a certain level (pump models only).
This varies based on model, however most models have been manufactured to have the fan turn off automatically.
This is not recommended, as the unit is built to operate using the drain hose/power cord provided.
This varies by model, however all dehumidifiers are a one shot timer. Please refer to the owner’s manual for timer instruction.
This varies based on model. With some models you simply screw the hose onto the outlet on the back of the unit. With other models you have to remove the bucket, feed the hose through the back of the unit and connect to the adaptor above the bucket area, then replace the bucket. It is important to look at your control panel. Some units have a “continuous drain” button on the control panel. If that is the case for your unit, you must press this button after the hose is in place or the function will not work. Please refer to your owner’s manual.