Skip to content

Premiere 30 BTU Dehumidifier

DDR30A1GP This product is no longer available.
  • Premiere 30 BTU Dehumidifier - DDR30A1GP
Premiere

Premiere 30 BTU Dehumidifier

DDR30A1GP

Limited Quantity

  • Light Grey
Do the Right Thing.

Description

Danby, the market leader in portable dehumidifiers, offers a wide variety of sizes and designs to fit your lifestyle.

Specifications

Dimensions
Product Width 33.97 cm 13 3/8"
Product Depth 26.35 cm 10 3/8"
Product Height 53.98 cm 21 1/4"
Weight
Shipping Weight 14.60kg 32.19lb
Capacity
Loading Capacity
  • 30 BTU
  • 30 Pints
Package Dimensions
Package Width N/A
Package Depth N/A
Package Height N/A

Features

  • 30 pint (14.2 litre) capacity dehumidifier per 24 hours
  • For areas up to 2000 sq. ft. depending on conditions
  • Environmentally friendly R410a refrigerant
  • Electronic controls
  • Quiet operation
  • Adjustable humidity settings
  • Auto de-icer prevents ice build-up on coils
  • Auto Restart feature - restarts the unit after a power outage
  • Low temperature feature allows the system to continue to operate until temperature reaches 5ºC (41°F)
  • Removable air filter is easy to clean

FAQs

It is supposed to be there to help determine the water level.
We recommend setting your dehumidifier to between 40-50%.
Information pertaining to watts and amps can be found on the rating plate located on the back of the unit.
There are a couple of reasons this could be occuring. 1) There may not be enough humidity in your environment or 2) Your relative humidity set higher than ambient humidity. Please adjust your settings accordingly if this is the case.
This will vary based on humidity level. It will pump out the water when it reaches a certain level (pump models only).
This varies based on model, however most models have been manufactured to have the fan turn off automatically.
This is not recommended, as the unit is built to operate using the drain hose/power cord provided.
This varies by model, however all dehumidifiers are a one shot timer. Please refer to the owner’s manual for timer instruction.
This varies based on model. With some models you simply screw the hose onto the outlet on the back of the unit. With other models you have to remove the bucket, feed the hose through the back of the unit and connect to the adaptor above the bucket area, then replace the bucket. It is important to look at your control panel. Some units have a “continuous drain” button on the control panel. If that is the case for your unit, you must press this button after the hose is in place or the function will not work. Please refer to your owner’s manual.