Designed for delightful owner support
Danby 50 Pint DoE Dehumidifier
DDR050EBWDB
Danby 50 Pint DoE Dehumidifier
DDR050EBWDB
Description
The Danby 50 pint dehumidifier helps to protect your home from humidity, mold and mildew by removing 23.6L of humidity per day. Ideal for spaces greater than 3000 sq.ft, the Danby dehumidifier has auto restart to restart your unit after a power failure and an auto de-icer to prevent frost build-up. The 4 castors make for easy room to room transport and the low temperature function allows you to operate the unit in temperatures as low as 5°C. The unit is Energy Star certified to run economically, even in very humid environments. This humidifier features easy to use electronic controls with LED display, a reusable/washable filter and a powerful 2 speed fan.
Specifications
| Dimensions | ||
| Product Width | N/A | |
|---|---|---|
| Product Depth | N/A | |
| Product Height | N/A | |
Features
- 50 Pint (23.6 L) Dehumidifier: for humidity control in spaces greater than 3000 sq. ft.
- Energy Star Rating
- Electronic controls with LED display
- Powerful 2 speed fan
- Direct drain feature allows for continuous operation
- Auto restart: Unit automatically restarts after a power failure
- Auto de-icer: prevents frost build up
- 24 hour programmable timer
- Low temp function: Unit operates at temperatures as low as 5°C
- 4 castors for easy room to room transport
- Reusable, washable filter
- Environmentally friendly R410A refrigerant
- Limited 2 year carry in warranty
Warranty
24 months parts and labor. Installation and/or yearly maintenance (cleaning) are not covered under warranty.
FAQs
It is supposed to be there to help determine the water level.
We recommend setting your dehumidifier to between 40-50%.
Yes, usually this air feels warm.
There are a couple of reasons this could be occuring. 1) There may not be enough humidity in your environment or 2) Your relative humidity set higher than ambient humidity. Please adjust your settings accordingly if this is the case.
This will vary based on humidity level. It will pump out the water when it reaches a certain level (pump models only).
This varies based on model, however most models have been manufactured to have the fan turn off automatically.
This is not recommended, as the unit is built to operate using the drain hose/power cord provided.
This varies by model, however all dehumidifiers are a one shot timer. Please refer to the owner’s manual for timer instruction.
This varies based on model. With some models you simply screw the hose onto the outlet on the back of the unit. With other models you have to remove the bucket, feed the hose through the back of the unit and connect to the adaptor above the bucket area, then replace the bucket. It is important to look at your control panel. Some units have a “continuous drain” button on the control panel. If that is the case for your unit, you must press this button after the hose is in place or the function will not work. Please refer to your owner’s manual.