Designed for delightful owner support
Danby 50 Pint Dehumidifier with PumpDDR050BJPWDB-ME-6
This Danby 50 pint dehumidifier with a pump helps protect your home from humidity by removing up to 23.6L of humidity per day. This is ideal for spaces up to 3,000 sq. ft., the Danby dehumidifier has an auto restart function that restarts your unit after a power failure, and an auto de-icer to prevent frost build-up. The 4 castors make moving from room-to-room very simple, and the Smart Dehumidify feature allows it to automatically control room humidity by factoring in ambient temperatures. The unit is Energy Star® Certified, so it runs economically, even in very humid environments. This model also features easy to use electronic controls with LED display, a reusable/washable filter, and a powerful 2 speed fan!
|Product Width||40.89 cm||16.1"|
|Product Depth||29.97 cm||11.8"|
|Product Height||61.72 cm||24.3"|
|Package Width||44.70 cm||17.6"|
|Package Depth||35.31 cm||13.9"|
|Package Height||66.80 cm||26.3"|
- 50 Pint (23.6 L) Dehumidifier: Controls humidity in spaces up to 3,000 sq. ft.
- Energy Star® Most Efficient 2021 Recognition
- Electronic controls with LED display
- Powerful 2 speed fan
- Smart Dehumidify: Unit will automatically control room humidity by factoring in ambient temperature
- Direct drain feature allows for continuous operation
- Auto restart: Unit automatically restarts after a power failure
- Auto de-icer: Prevents frost build up
- 24-hour programmable timer
- Low Temp Function: Unit operates at temperatures as low as 5°C
- 4 castors for easy room-to-room transport
- Reusable, washable filter
- Environmentally friendly R410A refrigerant
- Limited 2-year carry in warranty
24 months parts and labor Carry-In warranty.
This feature varies according to the product you have. It is recommended to check the manual for detailed instructions. Some models require screwing the hose onto the outlet on the back of the unit. Other models require the hose to be fed through the back of the unit and connect to the adaptor above the bucket area, then replace the bucket.
The water produced by your Danby’s dehumidifiers is referred to as grey water. It is not suitable for drinking, but can be great for watering plants and flowers.
All Danby dehumidifiers offer both a bucket for collecting water which can be removed and emptied when full as well as a continuous drain which bypasses the bucket with the use of a hose and gravity to empty into a drain. Some models have a pump option.
Danby dehumidifiers come with reusable filters. You would only need to replace a filter if it becomes damaged.
Danby’s dehumidifiers operate at a sound level between 50 and 56 decibels. This is within the normal decibel range for modern “quiet” dehumidifiers.
Danby dehumidifiers uses 2.2 to 4.1 Amps, and 250 to 420 Watts, based on this year’s model, varying with size.
It is supposed to be there to help determine the water level.
We recommend setting your dehumidifier to between 40-50%.
Yes, usually this air feels warm.
There are a couple of reasons this could be occuring. 1) There may not be enough humidity in your environment or 2) Your relative humidity set higher than ambient humidity. Please adjust your settings accordingly if this is the case.
This will vary based on humidity level. It will pump out the water when it reaches a certain level (pump models only).
This varies based on model, however most models have been manufactured to have the fan turn off automatically.
This is not recommended, as the unit is built to operate using the drain hose/power cord provided.
This varies by model, however all dehumidifiers are a one shot timer. Please refer to the owner’s manual for timer instruction.