Danby 4 Dishwasher

SKU: DDW496W Category:
This product has been discontinued.
  • 4 standard place settings
  • Mechanical controls
  • Quick connect to any tap
  • 4 wash cycles (pre-rinse, short wash, normal wash, saniwash)
  • Sani-wash feature increases water temperature to 158°F (70°C)
  • Durable stainless steel spray arm and interior
  • Automatic rinse agent dispenser
  • Low water consumption 8.6 litres (2.3 gallons) during normal cycle
  • Quiet operation

Compare
Description

Danby’s portable counter-top dishwasher is superbly engineered to offer full-size power in a small, smart design. At 17 ” high this dishwasher was designed to fit between the counter-top and cabinetry. The quick connect system eliminates the need for direct plumbing making it a convenient alternative to traditional models while mechanical controls ensure no-fuss programming. Ideal for the office, cottage or condo!

Specifications
Product Dimensions
  • Product Height
    22 8/16"
    55.88 cm
    Weight
    • Package Weight
      55.1 lbs
      24.99 kg
    Downloads
      Warranty

      12 months parts and labor coverage. Installation and/or yearly maintenance (cleaning) are not covered under warranty.

      FAQs
      Information pertaining to watts and camps can be found on the rating plated located on the side of the unit.
      We do not recommend using an extension cord.
      Check to make sure that the filters and drainage area are not clogged.
      Try setting the unit to a high temperature. The unit can take up to 2 hours to heat up the cold water depending on the temperature setting.
      Our units are designed to fit standard North American faucets.
      Please refer to your owner's manual for specifications on how much room is needed between the unit and each adjacent wall.
      Salt is not needed, however it is recommended. Note that if you do not use salt, the unit will still function, however the indicator light will remain illuminated.
      Rinse aid is not needed, however it is recommended. Note that if you do not use rinse aid, although the unit will still function, the rinse aid indicator light will remain illuminated.
      There is a protective layer of plastic that protects your control panel during transportation. This should be removed during installation.