Mainstays 30 Pint DehumidifierThis product has been discontinued.
- 30 pint (14.2 litre) capacity dehumidifier per 24 hours
- For areas up to 2000 sq. ft. depending on conditions
- Energy Star® compliant
- Environmentally friendly R410a refrigerant
- Electronic controls with LED display
- Quiet operation
- Adjustable humidity settings
- Auto de-icer prevents ice build-up on coils
- Removable air filter is easy to clean
- 2 fan speeds
- Low temperature feature allows the system to continue to operate until temperature reaches 5ºC
- Auto Restart feature
- Direct drain system allows for continuous operation
- Product Width14 3/16"35.56 cm
- Product Depth10 1/4"25.40 cm
- Product Height20 1/16"50.80 cm
- Package Width15.24"38.71 cm
- Package Depth11.69"29.69 cm
- Package Height20.87"53.01 cm
- Product Weight30.9 lbs14.02 kg
- Package Weight33.01 lbs14.97 kg
12 months parts and labor coverage with carry-in service. Installation and/or yearly maintenance (cleaning) are not covered under warranty.
Information pertaining to watts and camps can be found on the rating plated located on the side of the unit.
We do not recommend using an extension cord.
Square feet is calculated by multiplying the length by the width. For example, a room that is 10 feet long by 25 feet wide is 250 square feet.
This varies based on model, however most models have been manufactured to have the fan turn off automatically.
This is not recommended, as the unit is built to operate using the drain hose/power cord provided.
This varies by model, however all dehumidifiers are a one shot timer. Please refer to the owner's manual for timer instruction.
This feature varies according to the product you have. It is recommended to check the manual for detailed instructions. Some models require screwing the hose onto the outlet on the back of the unit. Other models require the hose to be fed through the back of the unit and connect to the adaptor above the bucket area, then replace the bucket.
Yes, usually this air feels warm.
There are a couple of reasons this could be occuring. 1) There may not be enough humidity in your environment or 2) Your relative humidity set higher than ambient humidity. Please adjust your settings accordingly if this is the case.
This will vary based on humidity level. It will pump out the water when it reaches a certain level (pump models only).
It is supposed to be there to help determine the water level.
We recommend setting your dehumidifier to between 40-50%.
Danby dehumidifiers uses 2.2 to 4.1 Amps, and 250 to 420 Watts, based on this year’s model, varying with size.
Danby’s dehumidifiers operate at a sound level between 50 and 56 decibels. This is within the normal decibel range for modern “quiet” dehumidifiers.
Danby dehumidifiers come with reusable filters. You would only need to replace a filter if it becomes damaged.
All Danby dehumidifiers offer both a bucket for collecting water which can be removed and emptied when full as well as a continuous drain which bypasses the bucket with the use of a hose and gravity to empty into a drain. Some models have a pump option.
The water produced by your Danby’s dehumidifiers is referred to as grey water. It is not suitable for drinking, but can be great for watering plants and flowers.