Premiere 45 Pint DehumidifierDDR45B3WP This product is no longer available.
Leading US Consumer Magazine, #1 Best Buy With this 45 pint (21.3 litre) capacity Danby dehumidifier, you won't have to worry about basements, offices, or any rooms in the house being too dingy or damp. This unit is perfect if you are trying to get rid of excess moisture from areas up to 2,500 square feet. This Energy Star® rated unit will help you cut down on electric bills and its environmentally friendly R410a refrigerant will help you keep a peace of mind. This sleek unit has adjustable humidity settings and two fan speeds that can be easily controlled electronically. Additionally, this unit will continue to run quietly until the temperature reaches 5ºC (41F) with sharp low-temperature feature. Its direct-drainage system and removable filter makes it easy to clean, and its easy-roll castors makes moving it to another room a breeze. This model comes with 24 months parts and labour coverage with carry-in service. Installation and/or Yearly Maintenance (cleaning) are not covered under warranty.
|Product Width||38.58 cm||15 3/16"|
|Product Depth||27.78 cm||10.9375"|
|Product Height||50.17 cm||19 3/4"|
- 45 pint (21.3 litre) capacity dehumidifier per 24 hours
- For areas up to 2500 sq. ft. depending on conditions
- Energy Star® compliant
- Environmentally friendly R410a refrigerant
- Electronic controls
- Adjustable humidity settings
- Quiet operation
- Auto de-icer prevents ice build-up on coils
- Removable air filter is easy to clean
- 2 fan speeds
- Low temperature feature allows the system to continue to operate until temperature reaches 5ºC
- Direct drain feature for continuous operation
- Easy-roll castors for smooth portability
24 months parts and labour coverage with carry-in service. Installation and/or Yearly Maintenance (cleaning) are not covered under warranty.
It is supposed to be there to help determine the water level.
We recommend setting your dehumidifier to between 40-50%.
Yes, usually this air feels warm.
There are a couple of reasons this could be occuring. 1) There may not be enough humidity in your environment or 2) Your relative humidity set higher than ambient humidity. Please adjust your settings accordingly if this is the case.
This will vary based on humidity level. It will pump out the water when it reaches a certain level (pump models only).
This varies based on model, however most models have been manufactured to have the fan turn off automatically.
This is not recommended, as the unit is built to operate using the drain hose/power cord provided.
This varies by model, however all dehumidifiers are a one shot timer. Please refer to the owner’s manual for timer instruction.
This varies based on model. With some models you simply screw the hose onto the outlet on the back of the unit. With other models you have to remove the bucket, feed the hose through the back of the unit and connect to the adaptor above the bucket area, then replace the bucket. It is important to look at your control panel. Some units have a “continuous drain” button on the control panel. If that is the case for your unit, you must press this button after the hose is in place or the function will not work. Please refer to your owner’s manual.