Skip to content

ArcticAire 5000 BTU Window Air Conditioner

AAC050MB1G This product is no longer available.
  • ArcticAire 5000 BTU Window Air Conditioner - AAC050MB1G

ArcticAire 5000 BTU Window Air Conditioner


Limited Quantity

  • Light Grey
Do the Right Thing.


You’ll never curse the summer heat and humidity again with this 5,000 BTU-capacity ArcticAire window air conditioner installed in your bedroom, apartment or condo. This sleek environmentally-friendly appliance can easily cool down an area of approximately 150 square feet in no time. It features dual fan speeds, two-way air direction, and an easy-to-use, variable electronic temperature control which enables you to set the window unit between 17ºC and 30ºC (63°F - 89°F).”


Product Width 41.28 cm 16 1/4"
Product Depth 34.93 cm 13 3/4"
Product Height 31.27 cm 12 5/16"
Shipping Weight 18.00kg 39.68lb
Package Dimensions
Package Width N/A
Package Depth N/A
Package Height N/A


  • 5000 BTU air conditioner cools approximately 150 sq. ft.
  • Environmentally friendly R410A refrigerant
  • 2 way air direction
  • Varaible temperature control from 17ºC - 30ºC (62.6ºF - 86ºF)
  • Dual Fan Speed (High - Low)
  • Mechanical Controls
  • Expandable window installation kit accommodates windows from 23 4/16"- 36 4/16" wide
  • Minimum window height required: 13 in. (33.0 cm)


24 months parts and labour coverage with carry-in service. Installation and/or Yearly Maintenance (cleaning) are not covered under warranty.


When selected, this automatically sets the appropriate option for your room based on the ambient temperature. For example, if it is 15°C outside, the unit would flip to fan mode. If it is set to 30°C, the unit would revert back to cooling mode.
No, this is not recommended. Please bring your AC unit indoors during the winter months.
Information pertaining to watts and amps can be found on the rating plate located on the back of the unit.
We do not recommend using an extension cord.
The sizes range from size 6-10 but varies based on model and screw location. Please consult your owner’s manual for more details.
The styrofoam that is inside the unit acts as insulation. Do not remove it. Only remove loose packaging.
Water is collected during the air conditioning process. This water will drain out of the unit and onto the ground and is why the unit should be installed on a slight downward tilt.
Follow Us on