Premiere 60 BTU DehumidifierDDR60A4GP
Hot and humid air is not only uncomfortable, but can also be harmful to your health. However, those will be the least of your concerns with this ultra-modern two-speed dehumidifier by Danby. This hard-working unit can handle 60 US pints per day (28.4 litres) and is designed to take the moisture out of areas up to 3,600 square feet in size. This highly-efficient model is Energy Star compliant to help cut down on expensive electricity bills and the R410a refrigerant is eco-friendly as it won’t harm the ozone layer. The easy-to-program humidity settings can be manipulated by the high-tech electronic controls as well as the convenient remote unit. There’s no need to worry about the comfort level of the room after a power outage since the automatic-restart feature will make sure the appliance will turn back on. In addition, the coils stay frost-free due to the clever automatic-de-icing system and the smart low-temperature function allows the dehumidifier to continue to operate until the temperature reaches 5ºC (41º F). This superior model also boasts a direct-drain feature for continuous operation and comes with a 24-month warranty on parts and labour.
|Product Width||38.74 cm||15 1/4"|
|Product Depth||28.26 cm||11 1/8"|
|Product Height||60.01 cm||23 5/8"|
- 60 U.S. pint (28.4 litre) capacity per 24 hours
- For areas up to 3600 sq. ft. depending on conditions
- Energy Star® compliant
- Non ozone depleting refrigerant - R410a
- Electronic controls with remote
- Create a comfortable environment with our programmable humidity settings
- Auto Restart feature - restarts the unit after a power outage
- Low temperature feature allows the system to continue to operate until temperature reaches 5ºC (41º F)
- Auto de-icer prevents ice build-up on coils
- 2-speed fan for air circulation
- Direct drain feature for continuous operation
It is supposed to be there to help determine the water level.
We recommend setting your dehumidifier to between 40-50%.
Information pertaining to watts and amps can be found on the rating plate located on the back of the unit.
Yes, usually this air feels warm.
There are a couple of reasons this could be occuring. 1) There may not be enough humidity in your environment or 2) Your relative humidity set higher than ambient humidity. Please adjust your settings accordingly if this is the case.
This will vary based on humidity level. It will pump out the water when it reaches a certain level (pump models only).
This varies based on model, however most models have been manufactured to have the fan turn off automatically.
This is not recommended, as the unit is built to operate using the drain hose/power cord provided.
This varies by model, however all dehumidifiers are a one shot timer. Please refer to the owner’s manual for timer instruction.
This varies based on model. With some models you simply screw the hose onto the outlet on the back of the unit. With other models you have to remove the bucket, feed the hose through the back of the unit and connect to the adaptor above the bucket area, then replace the bucket. It is important to look at your control panel. Some units have a “continuous drain” button on the control panel. If that is the case for your unit, you must press this button after the hose is in place or the function will not work. Please refer to your owner’s manual.