Skip to content

Danby 60 BTU Dehumidifier

DDR60A1GB This product is no longer available.
  • Energy Star
  • Danby
Danby

Danby 60 BTU Dehumidifier

DDR60A1GB

Limited Quantity

  • Energy Star
Do the Right Thing.

Description

Danby, the market leader in portable dehumidifiers, offers a wide variety of sizes and designs to fit your lifestyle.

Specifications

Dimensions
Product Width 39.05 cm 15 3/8"
Product Depth 27.94 cm 11"
Product Height 58.90 cm 23 3/16"
Weight
Shipping Weight 19.00kg 41.89lb
Capacity
Loading Capacity
  • 60 BTU
  • 60 Pints
  • 33 Liters
Package Dimensions
Package Width N/A
Package Depth N/A
Package Height N/A

Features

  • 60 pint (33 litre) capacity dehumidifier per 24 hours
  • For areas up to 3600 sq. ft. depending on conditions
  • Energy Star® compliant
  • Environmentally friendly R410a refrigerant
  • Electronic controls
  • 2 fan speeds
  • Quiet operation
  • Adjustable humidity settings
  • Low temperature feature allows the system to continue to operate until temperature reaches 5ºC
  • Auto Restart feature
  • Auto de-icer prevents ice build-up on coils
  • Direct drain feature for continuous operation
  • Removable air filter is easy to clean

FAQs

It is supposed to be there to help determine the water level.
We recommend setting your dehumidifier to between 40-50%.
Information pertaining to watts and amps can be found on the rating plate located on the back of the unit.
There are a couple of reasons this could be occuring. 1) There may not be enough humidity in your environment or 2) Your relative humidity set higher than ambient humidity. Please adjust your settings accordingly if this is the case.
This will vary based on humidity level. It will pump out the water when it reaches a certain level (pump models only).
This varies based on model, however most models have been manufactured to have the fan turn off automatically.
This is not recommended, as the unit is built to operate using the drain hose/power cord provided.
This varies by model, however all dehumidifiers are a one shot timer. Please refer to the owner’s manual for timer instruction.
This varies based on model. With some models you simply screw the hose onto the outlet on the back of the unit. With other models you have to remove the bucket, feed the hose through the back of the unit and connect to the adaptor above the bucket area, then replace the bucket. It is important to look at your control panel. Some units have a “continuous drain” button on the control panel. If that is the case for your unit, you must press this button after the hose is in place or the function will not work. Please refer to your owner’s manual.