Premiere 50 BTU DehumidifierDDR5009REE
Damp and dingy rooms are a thing of the past with this robust 50-pint (23.7 litre) dehumidifier as it’s designed to eliminate the most problematic humidity issues in your home or office. This Energy Star-compliant unit extracts up to 50 pints of excessive moisture every 24 hours from spaces up to approximately 3,000 square feet in size. It features an automatic-sensing humidity control system and a user-friendly electronic digital keypad with LED display and a handy remote control unit. This model’s smart compressor and direct-drain system will operate the quiet two-speed fan until the desired humidity setting is reached. However, the low-temperature feature makes sure it won’t fall lower than 5°C (41°F). The R410A refrigerant is ozone-friendly and the automatic restart function will turn the appliance back on after a power failure. Ice buildup on the coils is never a problem due to the auto de-icing feature. The portable design enables this tasteful dehumidifier to be moved freely from room to room via the built-in castors and handles and it comes with a solid 24-month warranty on parts and labour.
|Product Width||38.74 cm||15 4/16"|
|Product Depth||28.26 cm||11 2/16"|
|Product Height||60.01 cm||23 5/8"|
- 50 pint dehumidifier covers approximately 3,000 sq.ft.
- Non ozone depleting R410A refrigerant
- Electronic controls with remote
- Digital key pad with LED display is easy to use
- Create a comfortable environment with our programmable humidity settings
- Auto Restart feature - restarts the unit after a power outage
- Low temperature feature allows the system to continue to operate until temperature reaches 5ºC
- Auto de-icer prevents ice build-up on coils
- 2 speed fan circulates the air
- Direct drain feature for continuous operation
It is supposed to be there to help determine the water level.
We recommend setting your dehumidifier to between 40-50%.
Information pertaining to watts and amps can be found on the rating plate located on the back of the unit.
Yes, usually this air feels warm.
There are a couple of reasons this could be occuring. 1) There may not be enough humidity in your environment or 2) Your relative humidity set higher than ambient humidity. Please adjust your settings accordingly if this is the case.
This will vary based on humidity level. It will pump out the water when it reaches a certain level (pump models only).
This varies based on model, however most models have been manufactured to have the fan turn off automatically.
This is not recommended, as the unit is built to operate using the drain hose/power cord provided.
This varies by model, however all dehumidifiers are a one shot timer. Please refer to the owner’s manual for timer instruction.
This varies based on model. With some models you simply screw the hose onto the outlet on the back of the unit. With other models you have to remove the bucket, feed the hose through the back of the unit and connect to the adaptor above the bucket area, then replace the bucket. It is important to look at your control panel. Some units have a “continuous drain” button on the control panel. If that is the case for your unit, you must press this button after the hose is in place or the function will not work. Please refer to your owner’s manual.