ArcticAire 70 BTU DehumidifierADR70A2G
Coming Soon. You’ll be able to fend off uncomfortable humidity in areas of up to 3,800 square feet with this appealing portable 70 pint (33.1 litre) dehumidifier. The unit can be drained externally with the provided drainage hose as well as a standard garden hose and can remove as much as 70 pints of moisture every 24 hours. You’ll save money on replacements as the filter can be easily removed and washed and your electricity bills will be reduced since the appliance is Energy Star rated. The controls and bright LED display are electronic making it easy to program and monitor. If the unit fills up it will shut off automatically to make sure it doesn’t flow over. This model can be used in environments as low as 6.6C (44F). The dehumidifier also comes with an automatic-restart feature, two quiet fan speeds, and a handy automatic de-icing unit to make sure the coils don’t freeze. If you’d like to move the model to another room you simply have to roll it on its built-in castors.
|Product Width||38.74 cm||15 1/4"|
|Product Depth||30.96 cm||12 3/16"|
|Product Height||59.85 cm||23 9/16"|
- 70 pint (33.1 L) dehumidifier covers approximately 3800 sq ft
- Energy Star compliant
- Electronic controls
- Adjustable humidity settings
- 2 Fan speeds
- Low temperature feature - continues to operate until temperature reaches 44F (6.6C)
- Auto de-icer prevents ice build-up on coils
- Auto Restart feature
- Removable filter for easy cleaning
- Quiet operation
- Castors for easy portability
- Direct drain system allows for continuous operation
It is supposed to be there to help determine the water level.
We recommend setting your dehumidifier to between 40-50%.
Information pertaining to watts and amps can be found on the rating plate located on the back of the unit.
Yes, usually this air feels warm.
There are a couple of reasons this could be occuring. 1) There may not be enough humidity in your environment or 2) Your relative humidity set higher than ambient humidity. Please adjust your settings accordingly if this is the case.
This will vary based on humidity level. It will pump out the water when it reaches a certain level (pump models only).
This varies based on model, however most models have been manufactured to have the fan turn off automatically.
This is not recommended, as the unit is built to operate using the drain hose/power cord provided.
This varies by model, however all dehumidifiers are a one shot timer. Please refer to the owner’s manual for timer instruction.
This varies based on model. With some models you simply screw the hose onto the outlet on the back of the unit. With other models you have to remove the bucket, feed the hose through the back of the unit and connect to the adaptor above the bucket area, then replace the bucket. It is important to look at your control panel. Some units have a “continuous drain” button on the control panel. If that is the case for your unit, you must press this button after the hose is in place or the function will not work. Please refer to your owner’s manual.