Skip to content

Premiere 70 Dehumidifier

DDR70A2GP
  • Energy Star
  • Premiere 70  Dehumidifier - DDR70A2GP
Premiere

Premiere 70 Dehumidifier

DDR70A2GP
  • Energy Star
  • White
Smart Move.

Description

Excessive humidity and moisture can easily be removed from your room or office with this modern and efficient 70-pint (33.1 litre) portable dehumidifier. It’s designed to remove up to 70 pints of moisture every 24 hours from large areas up to 3,800 square feet. This will lower the temperature naturally, meaning you won’t need to run the air conditioning all the time. This will result in lower electricity bills and since the unit is Energy Star compliant you’ll save even more money. It’s convenient to move from room to room due to the built-in rolling castors meaning you can create a comfortable environment in numerous areas of your home. The electronic controls are easy to read and program and the appliance can run in temperatures as low as 5ºC (41F). A drain hose is included for direct draining and the environmentally-friendly model uses R410A refrigerant. There is a low and high fan speed, an automatic restart feature and an auto de-icing system. When it comes time to clean the filter it can easily be removed, washed, and put back in.

Specifications

Dimensions
Product Width38.10 cm15 1/4"
Product Depth30.48 cm12 3/16"
Product Height58.42 cm23 9/16"
Weight
Shipping Weight22.40kg49.38lb
Capacity
Loading Capacity
  • 70

Warranty

24 months parts and labor carry-in service. Installation and/or Yearly Maintenance (cleaning) are not covered under warranty.

Customer Reviews

  • bvseo_sdk, p_sdk, 3.1.0
  • CLOUD, getContent, 15.62ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 403 was returned;

FAQs

There are a couple of reasons this could be occurring. 1) There may not be enough humidity in your environment or 2) Your relative humidity set higher than ambient humidity. Please adjust your settings accordingly if this is the case.
This is not recommended, as the unit is built to operate using the drain hose/power cord provided.
It is supposed to be there to help determine the water level.
Information pertaining to watts and amps can be found on the rating plate located on the back of the unit.
We recommend setting your dehumidifier to between 40-50%.
This varies based on model, however most models have been manufactured to have the fan turn off automatically.
This varies based on model. With some models you simply screw the hose onto the outlet on the back of the unit. With other models you have to remove the bucket, feed the hose through the back of the unit and connect to the adaptor above the bucket area, then replace the bucket. It is important to look at your control panel. Some units have a “continuous drain” button on the control panel. If that is the case for your unit, you must press this button after the hose is in place or the function will not work. Please refer to your owner’s manual.
This will vary based on humidity level. It will pump out the water when it reaches a certain level (pump models only).
This varies by model, however all dehumidifiers are a one shot timer. Please refer to the owner’s manual for timer instruction.

Customer Reviews

  • bvseo_sdk, p_sdk, 3.1.0
  • CLOUD, getContent, 6.64ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 403 was returned;