Danby 70 Pint DehumidifierDDR070BDWDB
Mold and mildew come as a result of moisture and dampness within your house which poses a risk to not only your home's structure but your health as well. Thankfully, Danby Appliances offer a solution with this 70 pint (33.1 liters) portable dehumidifier. This unit works best in areas up to 4,500 square feet. With its Energy Star® rating and environmentally-friendly R410a refrigerant, this unit will help cut your electricity bills and help prevent further damage to the ozone layer. Use the electronic digital control panel to easily adjust between the two fan speeds (high/low) and set the low temperature function to allow the system to continue to operate at temperatures as low as 41ºF (5ºC). The smart dehumidify function allows the unit to automatically control room humidity by factoring in ambient temperature. Equipped with an automatic de-icing feature ensures the internal coils will always be ice-free. The handy built-in rolling castors make it super convenient to relocate the machine from room to room. In case of a power failure the unit will automatically restarts and the direct drain system allows for continuous operation. To clean; simply remove, wash, and quickly re-insert the reusable air filter. This premium dehumidifier also features a 24-month warranty on parts and labor.
|Product Width||40.96 cm||16 2/16"|
|Product Depth||30.00 cm||11 13/16"|
|Product Height||61.60 cm||24 4/16"|
- 70 U.S. pint (33.1 litre) capacity per 24 hours
- For areas up to 4,500 sq. ft. depending on conditions
- Energy Star® compliant
- Environmentally friendly R410A refrigerant
- Smart dehumidify function: Unit will automatically control room humidity by factoring in ambient temperature
- Electronic controls
- 2 Fan speeds (High/Low)
- Low temperature feature allows the system to continue to operate at temperatures as low as 41ºF (5ºC)
- Auto Restart: unit automatically restarts after a power failure
- Auto de-icer prevents frost build up
- Direct drain feature allows for continuous operation
- Reusable, washable air filter
- 4 castors for easy room to room transport
Danby 70 Pint Dehumidifier is rated out of 5 by 1.
Rated 5 out of 5 by Spin from Very good and low noise level Have two, one in basement and one upstairs. Both working fine after more than one year (basement) and more than 5 months (upstairs). Couple of issues: Manual shows and says in page 7 that the filter is in the front; it is in the back. Also, the picture in the website shows the dehumidifier placed very close to the wall; manual states that it should be at least 8 inches away from wall.
Date published: 2017-10-31
There are a couple of reasons this could be occurring. 1) There may not be enough humidity in your environment or 2) Your relative humidity set higher than ambient humidity. Please adjust your settings accordingly if this is the case.
We recommend setting your dehumidifier to between 40-50%.
Information pertaining to watts and amps can be found on the rating plate located on the back of the unit.
It is supposed to be there to help determine the water level.
Yes, usually this air feels warm.
This varies based on model, however most models have been manufactured to have the fan turn off automatically.
This varies based on model. With some models you simply screw the hose onto the outlet on the back of the unit. With other models you have to remove the bucket, feed the hose through the back of the unit and connect to the adaptor above the bucket area, then replace the bucket. It is important to look at your control panel. Some units have a “continuous drain” button on the control panel. If that is the case for your unit, you must press this button after the hose is in place or the function will not work. Please refer to your owner’s manual.
This varies by model, however all dehumidifiers are a one shot timer. Please refer to the owner’s manual for timer instruction.
This will vary based on humidity level. It will pump out the water when it reaches a certain level (pump models only).