Danby 30 Pint DehumidifierDDR030BDWDB
With this 30-pint (14.2 litre) dehumidifier, you'll have the opportunity to not only improve your family's health, but their comfort levels too. This efficient portable unit is Energy Star® rated and operates quietly on 2 fan speeds (high/low) in rooms up to 1,500 square feet. This unit has an auto-restart program and a smart dehumidifying function that allows the unit to automatically control humidity by factoring in ambient room temperature. The automatic de-icing system ensures the coils are always ice-free while the low temperature feature allows the system to continue to operate at temperatures as low as 41ºF (5ºC). Cleaning comes with ease due to the removable air filter and direct-drain system. It has four built-in castors that make it easy and convenient to move the unit from one room to another, and runs on environmentally-friendly R410A refrigerant, so you can sleep well knowing it isn't harming the ozone layer. This dehumidifier is covered by our 24-month warranty on parts and labour.
|Product Width||38.58 cm||15 3/16"|
|Product Depth||27.78 cm||10 15/16"|
|Product Height||50.17 cm||19 12/16"|
|Box Width||53.01 cm||20.87"|
|Box Depth||29.69 cm||11.69"|
|Box Height||42.01 cm||16.54"|
- 30 U.S. pint (14.2 litre) capacity per 24 hours
- For areas up to 1,500 sq. ft. depending on conditions
- Energy Star® compliant
- Environmentally friendly R410A refrigerant
- Smart dehumidify function: Unit will automatically control room humidity by factoring in ambient temperature
- Electronic controls
- 2 Fan speeds (High/Low)
- Low temperature feature allows the system to continue to operate at temperatures as low as 5ºC (41ºF)
- Auto Restart: unit automatically restarts after a power failure
- Auto de-icer prevents frost build up
- Direct drain feature allows for continuous operation
- Reusable, washable air filter
- 4 castors for easy room to room transport
There are a couple of reasons this could be occurring. 1) There may not be enough humidity in your environment or 2) Your relative humidity set higher than ambient humidity. Please adjust your settings accordingly if this is the case.
We recommend setting your dehumidifier to between 40-50%.
Information pertaining to watts and amps can be found on the rating plate located on the back of the unit.
It is supposed to be there to help determine the water level.
Yes, usually this air feels warm.
This varies based on model, however most models have been manufactured to have the fan turn off automatically.
This varies based on model. With some models you simply screw the hose onto the outlet on the back of the unit. With other models you have to remove the bucket, feed the hose through the back of the unit and connect to the adaptor above the bucket area, then replace the bucket. It is important to look at your control panel. Some units have a “continuous drain” button on the control panel. If that is the case for your unit, you must press this button after the hose is in place or the function will not work. Please refer to your owner’s manual.
This varies by model, however all dehumidifiers are a one shot timer. Please refer to the owner’s manual for timer instruction.
This will vary based on humidity level. It will pump out the water when it reaches a certain level (pump models only).