Premiere 45 DehumidifierDDR45A3GP
The uncomfortable summer humidity and heat can easily be controlled with this commanding portable dehumidifier. This unit is designed to refresh the air in any room up to approximately 2,500 square feet in size as it can remove up to 45 pints of moisture every 24 hours. This makes it an invaluable appliance for offices, apartments, condominiums and large rooms. The high-tech model can help keep energy bills in control as it’s Energy Star-compliant and the R410A refrigerant makes it environmentally friendly. The easy-to-program, adjustable humidity settings are electronic, which make it simple to control and monitor. There’s an automatic restart feature which turns the device back on in case of a power failure. The unit’s dual fan speeds (high and low) are extremely quiet and you’ll never get a buildup of ice on the coils due to the clever automatic de-icing system. When it comes time to clean the appliance things are made as easy as possible with the convenient removable air filter. This model also features a direct-drain system which allows it to operate continuously. However, you’re guaranteed the room won’t get too cold as the low-temperature feature makes sure it doesn’t get below 5°C (41°F). This chic dehumidifier also carries a 24-month warranty on parts and labour with carry-in service.
|Product Width||33.02 cm||13 3/8"|
|Product Depth||25.40 cm||10 3/8"|
|Product Height||53.34 cm||21 1/4"|
There are a couple of reasons this could be occurring. 1) There may not be enough humidity in your environment or 2) Your relative humidity set higher than ambient humidity. Please adjust your settings accordingly if this is the case.
It is supposed to be there to help determine the water level.
Information pertaining to watts and amps can be found on the rating plate located on the back of the unit.
We recommend setting your dehumidifier to between 40-50%.
Yes, usually this air feels warm.
This varies based on model, however most models have been manufactured to have the fan turn off automatically.
This varies based on model. With some models you simply screw the hose onto the outlet on the back of the unit. With other models you have to remove the bucket, feed the hose through the back of the unit and connect to the adaptor above the bucket area, then replace the bucket. It is important to look at your control panel. Some units have a “continuous drain” button on the control panel. If that is the case for your unit, you must press this button after the hose is in place or the function will not work. Please refer to your owner’s manual.
This will vary based on humidity level. It will pump out the water when it reaches a certain level (pump models only).
This varies by model, however all dehumidifiers are a one shot timer. Please refer to the owner’s manual for timer instruction.