Skip to content

Danby 30 Pint Dehumidifier

DDR30B2GDB
  • Energy Star
  • Danby 30 Pint Dehumidifier - DDR30B2GDB
Danby

Danby 30 Pint Dehumidifier

DDR30B2GDB
  • Energy Star
  • Light Grey
Smart Move.

Description

Your family’s health and comfort can be improved greatly with this stylish 30-pint (14.2 litre) dehumidifier. The portable Energy Star-compliant unit is designed to operate effectively and quietly in rooms of up to approximately 1,500 square feet in size. The modern electronic controls with LED display make it easy to program the adjustable humidity settings and two-speed fan. The appliance’s smart low-temperature mode enables it  to operate until the temperature reaches 5°C (41°F). The direct-drain system is ideal for continuous use while cleaning is as easy as can be due to the removable filter. This popular model also comes with an automatic restart function and the built-in castors make it quite easy to transport from room to room. It also runs on environmentally-friendly R410A refrigerant to help save the ozone layer and the automatic de-icing system guarantees the coils stay free of ice. This sleek dehumidifier is even more attractive with its satisfying 12-month warranty on parts and labour with carry-in service.

Specifications

Dimensions
Product Width36.04 cm14 3/16"
Product Depth26.04 cm10 1/4"
Product Height51.22 cm20.16666667"
Weight
Shipping Weight14.30kg31.53lb
Capacity
Loading Capacity
  • 30
  • 30 Pints
  • 14.2 Liters

Warranty

12 month parts and labour coverage with carry-in service. Installation and/or Yearly Maintenance (cleaning) are not covered under warranty.

Customer Reviews

  • bvseo_sdk, p_sdk, 3.1.0
  • CLOUD, getContent, 41.57ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 403 was returned;

FAQs

There are a couple of reasons this could be occurring. 1) There may not be enough humidity in your environment or 2) Your relative humidity set higher than ambient humidity. Please adjust your settings accordingly if this is the case.
It is supposed to be there to help determine the water level.
Information pertaining to watts and amps can be found on the rating plate located on the back of the unit.
We recommend setting your dehumidifier to between 40-50%.
This varies based on model, however most models have been manufactured to have the fan turn off automatically.
This varies based on model. With some models you simply screw the hose onto the outlet on the back of the unit. With other models you have to remove the bucket, feed the hose through the back of the unit and connect to the adaptor above the bucket area, then replace the bucket. It is important to look at your control panel. Some units have a “continuous drain” button on the control panel. If that is the case for your unit, you must press this button after the hose is in place or the function will not work. Please refer to your owner’s manual.
This will vary based on humidity level. It will pump out the water when it reaches a certain level (pump models only).
This varies by model, however all dehumidifiers are a one shot timer. Please refer to the owner’s manual for timer instruction.