Skip to content

ArcticAire 30 Pint Dehumidifier

ADR30B1G
  • Energy Star
  • ArcticAire 30 Pint Dehumidifier - ADR30B1G
ArcticAire

ArcticAire 30 Pint Dehumidifier

ADR30B1G
  • Energy Star
  • Light Grey
Smart Move.

Description

You’ll never have to worry about damp, stale air again with this elite 30-pint (14.2 litre) capacity dehumidifier from Danby. This portable Energy Star-compliant unit will minimize electricity costs and is ideal for areas up to 1,500 square feet in size. It runs on R410A refrigerant, making it very environmentally friendly and the quiet two-speed fan is perfect for circulating the air. The attractive model comes with easy-to-use electronic controls with a LED display feature as well as an automatic-restart component. The unit’s low-temperature element and direct-drain features enable it to operate continuously until the temperature reaches 5°C  (41°F) while the smart automatic de-icing system makes sure that the coils stay ice free. The adjustable humidity settings can be programmed quite effortlessly and the air filter is removable making it as easy as pie to clean. This solid dehumidifier can easily be moved from room to room due to the built-in castors and it comes with a 24-month warranty on parts and labour with carry-in service.

Specifications

Dimensions
Product Width36.04 cm14 3/16"
Product Depth26.04 cm10 1/4"
Product Height50.96 cm20 1/16"
Weight
Shipping Weight14.30kg31.53lb
Capacity
Loading Capacity
  • 30 Pints
  • 14.2 Liters

Warranty

24 month parts and labour coverage with carry-in service. Installation and/or Yearly Maintenance (cleaning) are not covered under warranty.

Customer Reviews

  • bvseo_sdk, p_sdk, 3.1.0
  • CLOUD, getContent, 25.64ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 403 was returned;

FAQs

There are a couple of reasons this could be occurring. 1) There may not be enough humidity in your environment or 2) Your relative humidity set higher than ambient humidity. Please adjust your settings accordingly if this is the case.
It is supposed to be there to help determine the water level.
Information pertaining to watts and amps can be found on the rating plate located on the back of the unit.
We recommend setting your dehumidifier to between 40-50%.
This varies based on model, however most models have been manufactured to have the fan turn off automatically.
This varies based on model. With some models you simply screw the hose onto the outlet on the back of the unit. With other models you have to remove the bucket, feed the hose through the back of the unit and connect to the adaptor above the bucket area, then replace the bucket. It is important to look at your control panel. Some units have a “continuous drain” button on the control panel. If that is the case for your unit, you must press this button after the hose is in place or the function will not work. Please refer to your owner’s manual.
This will vary based on humidity level. It will pump out the water when it reaches a certain level (pump models only).
This varies by model, however all dehumidifiers are a one shot timer. Please refer to the owner’s manual for timer instruction.